Stone wool – Northern Renaissance
+7 (812) 777 53 99+7 (812) 928 53 998 (800) 707-53-99 Звонок по России бесплатный

PAROC FPS 17

Fire protection slab PAROC FPS 17 is non-combustible stone wool insulation for use as fire protection for steel structures, chimneys, doors, furnaces and ovens.

more
thumbnail Fire protection slab PAROC FPS 17 is non-combustible stone wool insulation for use as fire protection for steel structures, chimneys, doors, furnaces and ovens.

Stone wool insulation has varying fire protection abilities that are largely dependant on the density of the material as well as the used insulation thickness. Generally speaking, the higher the density, the longer the fire protection time.

PAROC FPS 17 has a density of ~170 kg/m3. The right product for the application will be chosen based on the system provider's approval. PAROC FPS 17 has ETA approval for fire protection for steel structures. The product is easy to handle and install for different kinds of fire applications.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200 °C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000 °C.

Technical parameters

Nominal Density
170 kg/m3
Width
600 mm
Length
1200 mm
Thickness
20-120 mm
Reaction to Fire, Euroclass
A1
Combustibility
Non-combustible
Thermal Conductivity λD
0,038 W/mK

PAROC FPS 14

Fire protection slab PAROC FPS 14 is non-combustible stone wool insulation for use as fire protection for steel structures, chimneys, doors, furnaces and ovens.

more
thumbnail Fire protection slab PAROC FPS 14 is non-combustible stone wool insulation for use as fire protection for steel structures, chimneys, doors, furnaces and ovens.

Stone wool insulation has varying fire protection abilities that are largely dependant on the density of the material as well as the used insulation thickness. Generally speaking, the higher the density, the longer the fire protection time.

PAROC FPS 14 has a density of ~140 kg/m3. The right product for the application will be chosen based on the system provider's approval. The product is easy to handle and install for different kinds of fire applications.

Technical parameters

Nominal Density
140 kg/m³
Width
600 mm
Length
1200 mm
Thickness
20-120 mm
Reaction to Fire, Euroclass
A1
Thermal Conductivity λD
0,037 W/mK
Combustibility
Non-combustible

Paroc ROS 30

Roof slab PAROC ROS 30 is non-combustible stone wool insulation for use as a load bearing thermal insulation layer of existing and new flat roofs.

more
thumbnail Roof slab PAROC ROS 30 is non-combustible stone wool insulation for use as a load bearing thermal insulation layer of existing and new flat roofs.

The roof insulation slab is developed to provide sustainable, hard and fire safe bedding for rigid top insulation layers as well as insulating the bearing layer in renovation sites. The suitable roof slab for flat roof will be chosen based on the product's mechanical properties and thermal conductivity.

The compressive stress of PAROC ROS 30 is 30 kPa, which means that the slab can carry a 3000 kg/m2 load during installation and use. This means that it is suitable for normal level loads.

Roof slab PAROC ROS 30g has ventilation grooves in the surface of the board. These grooves enable the constant drying of the whole roof construction.

Technical parameters

Width x Length
1200*1800 mm
Thickness
40-250 mm
Compressive Stress at 10 % deformation CS(10), σ10
30 kPa
Reaction to Fire, Euroclass
A1
Thermal Conductivity λD
0,036 W/mK
Combustibility
Non-combustible
Point Load PL(5)
250 N

Paroc ROS 40

Roof slab PAROC ROS 40 is non-combustible stone wool insulation for use as a load bearing thermal insulation layer of existing and new flat roofs.

more
thumbnail Roof slab PAROC ROS 40 is non-combustible stone wool insulation for use as a load bearing thermal insulation layer of existing and new flat roofs.

The roof insulation slab is developed to provide sustainable, hard and fire safe bedding for rigid top insulation layers as well as insulating the bearing layer in renovation sites. The suitable roof slab for flat roof will be chosen based on the product's mechanical properties and thermal conductivity.

The compressive stress of PAROC ROS 40 is 40 kPa, which means that the slab can carry a 4000 kg/m2 load during installation and use. This means that it is suitable for normal level loads.

Roof slab PAROC ROS 40g is equipped with ventilation grooves on the upper side. These grooves enable the constant drying of the whole roof construction.

Technical parameters

Width x Length
1200*1800 mm
Thickness
40-180 mm
Compressive Stress at 10 % deformation CS(10), σ10
40 kPa
Reaction to Fire, Euroclass
A1
Thermal Conductivity λD
0,037 W/mK
Water Vapour Transmission MU, µ
1
Point Load PL(5)
350 N
Combustibility
Non-combustible

PAROC ROS 50

Roof slab PAROC ROS 50 is non-combustible stone wool insulation for use as a load bearing thermal insulation layer of existing and new flat roofs.

more
thumbnail Roof slab PAROC ROS 50 is non-combustible stone wool insulation for use as a load bearing thermal insulation layer of existing and new flat roofs.

The roof insulation slab is developed to provide sustainable, hard and fire safe bedding for most types of flat roof coverings as well as insulating the bearing layer in renovation sites.

PAROC ROS 50 insulation is used in concrete and corrugated steel constructions as a single-layer insulation. The thickness of the insulation layer should be below 150 mm.

The compressive stress of the product is 50 kPa, which means that the slab can carry a 5000 kg/m2 load during installation and use.

Technical parameters

Width x Length
1200*1800 mm
Thickness
40-100 mm
Compressive Stress at 10 % deformation CS(10), σ10
50 kPa
Reaction to Fire, Euroclass
A1
Thermal Conductivity λD
0,038 W/mK
Water Vapour Transmission MU, µ
1
Point Load PL(5)
450 N
Combustibility
Non-combustible

PAROC ROS 60

Roof slab PAROC ROS 60 is non-combustible stone wool insulation for use as a load bearing thermal insulation layer of existing and new flat roofs.

more
thumbnail Roof slab PAROC ROS 60 is non-combustible stone wool insulation for use as a load bearing thermal insulation layer of existing and new flat roofs.

The roof insulation slab is developed to provide sustainable, hard and fire safe bedding for most types of flat roof coverings as well as insulating the bearing layer in renovation sites.

PAROC ROS 60 insulation is used in concrete and corrugated steel constructions as a single-layer insulation. The thickness of the insulation layer should be below 120 mm.

The compressive stress of the product is 60 kPa, which means that the slab can carry a 6000 kg/m2 load during installation and use. This means that it is suitable for high level loads.

Technical parameters

Width x Length
1200*1800 mm
Thickness
40-130 mm
Compressive Stress at 10 % deformation CS(10), σ10
60 kPa
Tensile Strength Perpendicular to Faces TR, σmt
10 kPa
Reaction to Fire, Euroclass
A1
Combustibility
Non-combustible
Thermal Conductivity λD
0,039 W/mK
Point Load PL(5)
550 N

PAROC ROB 60

Roof board PAROC ROB 60 is non-combustible stone wool insulation for use as a top layer of existing and new flat roofs.

more
thumbnail Roof board PAROC ROB 60 is non-combustible stone wool insulation for use as a top layer of existing and new flat roofs.

The roof insulation board is developed to provide sustainable, hard and fire safe bedding for most types of flat roof coverings as well as insulating the bearing layer in renovation sites.

The compressive stress of the product is 60 kPa, which means that the slab can carry a 6000 kg/m2 load during installation and use.

Technical parameters

Width x Length
1200*1800 mm
Thickness
20-30 mm
Compressive Stress at 10 % deformation CS(10), σ10
60 kPa
Tensile Strength Perpendicular to Faces TR, σmt
10 kPa
Reaction to Fire, Euroclass
A1
Thermal Conductivity λD
0,038 W/mK
Point Load PL(5)
550 N
Combustibility
Non-combustible
Air Permeability Coefficient, ℓ
15 x 10-6 m3/m²sPa
Water Vapour Transmission MU, µ
1

PAROC ROB 80

Roof board PAROC ROB 80 is non-combustible stone wool insulation for use as a top layer of existing and new flat roofs.

more
thumbnail Roof board PAROC ROB 80 - is non-combustible stone wool insulation for use as a top layer of existing and new flat roofs.

The roof insulation board is developed to provide sustainable, hard and fire safe bedding for most types of flat roof coverings as well as insulating the bearing layer in renovation sites.

The compressive stress of the product is 80kPa, which means that the slab can carry a 8000kg/m2 load during installation and use.

PAROC ROB 80t - The roof board is faced with natural coloured glass fibre tissue.

Technical parameters

Width x Length
1200*1800 (600*1200) mm
Thickness
20-30 mm
Reaction to Fire, Euroclass
A1
Combustibility
Non-combustible
Compressive Stress at 10 % deformation CS(10), σ10
80 kPa
Tensile Strength Perpendicular to Faces TR, σmt
10 kPa
Thermal Conductivity λD
0,038 W/mK
Point Load PL(5)
700 N
Water Vapour Transmission MU, µ
1

PAROC WAB 10t

Wall board PAROC WAB 10t is non-combustible stone wool insulation for existing and new ventilated external walls.

more
thumbnail Wall board PAROC WAB 10t is non-combustible stone wool insulation for existing and new ventilated external walls.

The thin wall insulation board can be used as an external layer of two layer-systems in combination with another thermal insulation layer. With a two-layer system you can create a continuous thermal insulation layer with staggered joints to improve the thermal performance of the wall.

The wall board is faced with natural coloured glass fibre tissue.

Technical parameters

Width x Length
2400*1200 mm
Thickness
20 mm
Reaction to Fire, Euroclass
A1
Combustibility
Non-combustible
Thermal Conductivity λD
0,036 W/mK
Air Permeability Coefficient, ℓ
10 x 10-6 m2/Pa*s
Facing Material
Glass fibre tissue
Water Absorption, Short Term WS, Wp
≤ 1 kg/m²
Water Absorption, Long Term WL(P), Wlp
≤ 3 kg/m²

PAROC WAS 25

Wall slab PAROC WAS 25 is non-combustible stone wool insulation for existing and new ventilated external walls.

more
thumbnail Wall slab PAROC WAS 25 is non-combustible stone wool insulation for existing and new ventilated external walls.

The wall insulation slab is used as an external layer of two layer-systems in combination with another low-density thermal insulation layer. With a two-layer system it is easy to create a continuous thermal insulation layer with staggered joints to improve the thermal performance of the wall.

PAROC WAS 25t - The wall slab is faced with natural coloured glass fibre tissue.

Technical parameters

Width x Length
600*1200 mm
Thickness
30-120 mm
Air Permeability Coefficient, ℓ
25 x 10-6 m2/Pa*s
Thermal Conductivity λD
0,033 W/mK
Reaction to Fire, Euroclass
A1
Combustibility
Non-combustible
Water Absorption, Short Term WS, Wp
≤ 1 kg/m²
Water Absorption, Long Term WL(P), Wlp
≤ 3 kg/m²
Water Vapour Transmission MU, µ
1

PAROC WAS 35

Wall slab PAROC WAS 35 is non-combustible stone wool insulation for existing and new ventilated external walls.

more
thumbnail Wall slab PAROC WAS 35 is non-combustible stone wool insulation for existing and new ventilated external walls.

The wall slab insulation can be used in one layer-systems where the insulation and the surface layer against the ventilation cavity is taken care of by a single product.

PAROC WAS 35t - The wall slab is faced with natural coloured glass fibre tissue.

Technical parameters

Width x Length
600*1200 mm
Thickness
30-150 mm
Air Permeability Coefficient, ℓ
35 x 10-6 m2/Pa*s
Thermal Conductivity λD
0,033 W/mK
Reaction to Fire, Euroclass
A1
Water Vapour Transmission MU, µ
1
Combustibility
Non-combustible
Water Absorption, Short Term WS, Wp
≤ 1 kg/m²
Water Absorption, Long Term WL(P), Wlp
≤ 3 kg/m²

PAROC WAS 50

Wall slab PAROC WAS 50t is non-combustible stone wool insulation for existing and new slightly ventilated external walls.

more
thumbnail Wall slab PAROC WAS 50 is non-combustible stone wool insulation for existing and new slightly ventilated external walls.

The product is suitable for the insulation of walls with brick facades. The wall slab insulation can be used in one layer-systems where the insulation and surface layer against the ventilation cavity is taken care of by a single product.

PAROC WAS 50t - The wall slab is faced with natural coloured glass fibre tissue.

Technical parameters

Width x Length
600*1200 mm
Thickness
50-150 mm
Reaction to Fire, Euroclass
A1
Combustibility
Non-combustible
Thermal Conductivity λD
0,034 W/mK
Air Permeability Coefficient, ℓ
50 x 10-6 m2/Pa*s
Water Absorption, Short Term WS, Wp
≤ 1 kg/m²
Water Absorption, Long Term WL(P), Wlp
≤ 3 kg/m²

PAROC Fatio

Rendered facade slab PAROC Fatio is non-combustible stone wool insulation for use as a base layer of both thin and thick rendering facade in existing and new buildings.

more
thumbnail Rendered facade slab PAROC Fatio is non-combustible stone wool insulation for use as a base layer of both thin and thick rendering facade in existing and new buildings.

The rendered facade insulation slab has excellent thermal insulation and alkali resistance properties. It doesn't accumulate moisture or react to changes in temperature.

With the rendered facade insulation slab you can easily create a smooth base layer for thick rendering in case of an uneven surface of the supporting wall. At the same time, you will improve the sound insulation and increase the fire resistance of the external wall.

Technical parameters

Length
1200 mm
Width
600 mm
Thickness
50-150 mm
Reaction to Fire, Euroclass
A1
Combustibility
Non-combustible
Tensile Strength Perpendicular to Faces TR, σmt
5 kPa
Compressive Stress at 10 % deformation CS(10), σ10
10 kPa
Thermal Conductivity λD
0,035 W/mK
Water Vapour Transmission MU, µ
1,0

PAROC Linio 10

Rendered facade slab PAROC Linio 10 is non-combustible stone wool insulation for use as a base layer for thin rendering facade in existing and new buildings.

more
thumbnail Rendered facade slab PAROC Linio 10 is non-combustible stone wool insulation for use as a base layer for thin rendering facade in existing and new buildings.

The rendered facade insulation slab has excellent thermal insulation and mechanical properties. It doesn't accumulate moisture or react to changes in temperature.

With the rendered facade insulation slab you can easily create a smooth base layer for thin and thick rendering in case of an uneven surface of the supporting wall. At the same time, you will improve the sound insulation and increase the fire resistance of the external walls.

Advantages
  • Slab insulation is suitable for insulation of all types of walls.
  • This type of insulation is particularly recommended when the surface of the supporting wall structure is uneven.
  • The insulation slabs are fastened to the supporting wall structure by gluing and using mechanical fasteners.

Technical parameters

Length
1200 mm
Width
600 mm
Thickness
40-200 mm
Reaction to Fire, Euroclass
A1
Combustibility
Non-combustible
Tensile Strength Perpendicular to Faces TR, σmt
10 kPa
Compressive Stress at 10 % deformation CS(10), σ10
20 kPa
Thermal Conductivity λD
0,036 W/mK
Water Vapour Transmission MU, µ
1,0

PAROC Linio 15

Rendered facade board PAROC Linio 15 is non-combustible stone wool insulation for use as a base layer of thin rendered facade around the openings of existing and new buildings.

more
thumbnail Rendered facade board PAROC Linio 15 is non-combustible stone wool insulation for use as a base layer of thin rendered facade around the openings of existing and new buildings.

PAROC Linio 15 board has excellent thermal insulation and alkali resistance properties. It doesn't accumulate moisture or react to changes in temperature.

With thin rendered facade insulation board you can easily create a smooth base layer for thin rendering around windows and doors where the thickness of the layer is critical.

Advantages
  • Slab insulation is suitable for insulation of all types of walls.
  • This type of insulation is particularly recommended when the surface of the supporting wall structure is uneven.
  • The insulation slabs are fastened to the supporting wall structure by gluing and using mechanical fasteners.

Technical parameters

Length
1200 mm
Width
600 mm
Thickness
20-200 mm
Reaction to Fire, Euroclass
A1
Combustibility
Non-combustible
Tensile Strength Perpendicular to Faces TR, σmt
15 kPa
Compressive Stress at 10 % deformation CS(10), σ10
30 kPa
Thermal Conductivity λD
0,037 W/mK
Water Vapour Transmission MU, µ
1,0

PAROC Linio 80

Rendered facade lamella PAROC Linio 80 is non-combustible stone wool insulation for use as a base layer of thin rendered facade in existing and new buildings.

more
thumbnail Rendered facade lamella PAROC Linio 80 is non-combustible stone wool insulation for use as a base layer of thin rendered facade in existing and new buildings.

The lamella has excellent thermal insulation and alkali resistance properties. It doesn't accumulate moisture or react to changes in temperature.

With rendered facade insulation lamella you can easily create a smooth base layer for thin rendering, improve the sound insulation and increase the fire resistance of walls. Lamellas are installed with adhesive mortar. Separate mechanical fasteners are not normally needed (check the system owner instructions).
Advantages
  • It is fast and easy to install.
  • It normally requires no mechanical fasteners. The lamellas are glued to the supporting wall using adhesive mortar.
  • It provides an even basis for the rendering because the surface of the lamella is sawn.
  • The lamellas have very high tensile strength, which makes them suitable for situations where high mechanical strength is required.

Technical parameters

Length
1200 mm
Width
200 mm
Thickness
50-220 mm
Reaction to Fire, Euroclass
A1
Combustibility
Non-combustible
Thermal Conductivity λD
0,040 W/mK
Tensile Strength Perpendicular to Faces TR, σmt
80 kPa
Compressive Strength CS(Y), σm
50 kPa
Water Vapour Transmission MU, µ
1,0
Water Absorption, Short Term WS, Wp
≤ 1 kg/m²
Water Absorption, Long Term WL(P), Wlp
≤ 3 kg/m²

PAROC eXtra

General insulation slab PAROC eXtra is made of non-combustible stone wool and used for thermal, sound and fire insulation applications, such as walls, attics and floors, in all kinds of buildings.

more
thumbnail General insulation slab PAROC eXtra is made of non-combustible stone wool and used for thermal, sound and fire insulation applications, such as walls, attics and floors, in all kinds of buildings.

The highly insulating general insulation slab is soft and rigid. The slab is easy to handle, cut and install for different kinds of applications. The insulation doesn't settle, shrink or loose its insulation properties during its lifetime.

The greater density of the slab is not prone to convection so the thermal resistance of the product is maintained even during extremely cold winters.

Technical parameters

Length
1200 mm
Width
600 mm
Thickness
50-200 mm
Reaction to Fire, Euroclass
A1
Combustibility
Non-combustible
Thermal Conductivity in 10 °C, λ10
0,036 W/mK
Thermal Conductivity in 25 °C, λ25
0,038 W/mK
Air Permeability Coefficient, ℓ
100 x 10-6 m2/Pa*s
Water Vapour Transmission MU, µ
1,0

PAROC eXtra plus

General insulation slab PAROC eXtra plus is made of non-combustible stone wool and used for thermal, sound and fire insulation applications, such as walls, attics and floors, in all kinds of buildings.

more
thumbnail General insulation slab PAROC eXtra plus is made of non-combustible stone wool and used for thermal, sound and fire insulation applications, such as walls, attics and floors, in all kinds of buildings.

Soft and rigid PAROC eXtra plus has very low thermal conductivity so it is used in applications where construction depth is critical.

The slab is easy to handle, cut and install for different kinds of applications. The insulation doesn't settle, shrink or loose its insulation properties during its lifetime.

The greater density of the slab is not prone to convection so the thermal resistance of the product is maintained even during extremely cold winters.

Technical parameters

Length
1200 mm
Width
600 mm
Thickness
50-150 mm
Reaction to Fire, Euroclass
A1
Combustibility
Non-combustible
Thermal Conductivity in 10 °C, λ10
0,034 W/mK
Thermal Conductivity in 25 °C, λ25
0,036 W/mK
Air Permeability Coefficient, ℓ
60 x 10-6 m2/Pa*s
Water Vapour Transmission MU, µ
1,0
Модуль кислотности
2,2
Water Absorption, Short Term WS, Wp
≤ 1 kg/m²
Water Absorption, Long Term WL(P), Wlp
≤ 3 kg/m²

PAROC SSB 1

Step sound board PAROC SSB 1 is non-combustible stone wool insulation for use as a sound absorbing layer (spring) for the reduction of impact sound in floating floors.

more
thumbnail Step sound board PAROC SSB 1 is non-combustible stone wool insulation for use as a sound absorbing layer (spring) for the reduction of impact sound in floating floors.

The fibre orientation in the step sound insulation slab is mainly horizontal compared to, for example, a roof slab or ground slab. The horizontal fibre direction gives a lower dynamic stiffness, which means better impact sound insulation.

The compressive stress of the product is 10 kPa, which means that it can carry a 1000 kg load during installation and use.

Technical parameters

Length
1200 mm
Width
600 mm
Thickness
20-50 mm
Reaction to Fire, Euroclass
A1
Combustibility
Non-combustible
Compressive Stress at 10 % deformation CS(10), σ10
15 kPa
Thermal Conductivity λD
0,035 W/mK
Water Absorption, Short Term WS, Wp
≤ 1 kg/m²
Water Absorption, Long Term WL(P), Wlp
≤ 3 kg/m²
Water Vapour Transmission MU, µ
1

PAROC SSB 4

Step sound board PAROC SSB 4 is non-combustible stone wool insulation for use as a sound absorbing layer (spring) for the reduction of impact sound in floating floors.

more
thumbnail Step sound board PAROC SSB 4 is non-combustible stone wool insulation for use as a sound absorbing layer (spring) for the reduction of impact sound in floating floors.

The fibre orientation in the step sound insulation slab is mainly horizontal compared to, for example, a roof slab or ground slab. The horizontal fibre direction gives a lower dynamic stiffness, which means better impact sound insulation.

The compressive stress of the product is 40 kPa, which means that the slab can carry a 4000 kg/m2 load during installation and use. PAROC SSB 4 can be used both in concrete and timber structures.

Technical parameters

Length
1200 mm
Width
600 mm
Thickness
50-100 mm
Reaction to Fire, Euroclass
A1
Combustibility
Non-combustible
Compressive Stress at 10 % deformation CS(10), σ10
40 kPa
Thermal Conductivity λD
0,037 W/mK
Water Absorption, Short Term WS, Wp
≤ 1 kg/m²
Water Absorption, Long Term WL(P), Wlp
≤ 3 kg/m²

PAROC GRS 20

Ground slab PAROC GRS 20 is non-combustible stone wool insulation for existing and new basement walls and ground floors.

more
thumbnail Ground slab PAROC GRS 20 is non-combustible stone wool insulation for existing and new basement walls and ground floors.

The water repellent ground insulation slab can be used as thermal insulation and capillary break both in the external layer of a foundation and underground slab.

The compressive stress of the slab is 20 kPa, which means that the slab can carry a 2000 kg/m2 load. To work correctly, the other side of the external ground insulation has to be against a warm construction such as a wall of floor.

Technical parameters

Width
1200 mm
Length
600 mm
Thickness
50-100 mm
Reaction to Fire, Euroclass
A1
Combustibility
Non-combustible
Compressive Stress at 10 % deformation CS(10), σ10
20 kPa
Thermal Conductivity λD
0,035 W/mK
Water Absorption, Short Term WS, Wp
≤ 1 kg/m²
Water Absorption, Long Term WL(P), Wlp
≤ 3 kg/m²
Water Vapour Transmission MU, µ
1

PAROC CGL 20

Ceiling lamella is non-combustible stone wool insulation for existing and new cellar ceilings.

more
thumbnail Ceiling lamella PAROC CGL 20 is non-combustible stone wool insulation for existing and new cellar ceilings. With ceiling insulation lamella you can easily insulate cellar ceilings, creating good sound absorption for the space and increasing fire safety between floors.

PAROC CGL 20cy - Glued lamella insulation with faceted edges forms a structured base layer for the ceiling surface. The visible surface of the lamella is pre-painted/coated for better application of the paint.

PAROC CGL 20cyc - Glued lamella insulation with faceted edges forms a structured base layer for the ceiling surface. The lamella is pre-painted/coated on both sides.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Technical parameters

Length
1200 mm
Width
200 mm
Thickness
50-200 mm
Reaction to Fire, Euroclass
A1
Combustibility
Non-combustible
Compressive Strength CS(Y), σm
20 kPa
Thermal Conductivity λD
0,037 W/mK
Air Flow Resistivity AFR
10 kPa*s/m²
Water Absorption, Short Term WS, Wp
≤ 1 kg/m²
Water Absorption, Long Term WL(P), Wlp
≤ 3 kg/m²



8 (800) 707-53-99 Звонок по России бесплатный
firm@sevren.ru