Flat Roof Insulations – Northern Renaissance
+7 (812) 777 53 99+7 (812) 928 53 998 (800) 707-53-99 Звонок по России бесплатный

Paroc ROS 30

Roof slab PAROC ROS 30 is non-combustible stone wool insulation for use as a load bearing thermal insulation layer of existing and new flat roofs.

more
thumbnail Roof slab PAROC ROS 30 is non-combustible stone wool insulation for use as a load bearing thermal insulation layer of existing and new flat roofs.

The roof insulation slab is developed to provide sustainable, hard and fire safe bedding for rigid top insulation layers as well as insulating the bearing layer in renovation sites. The suitable roof slab for flat roof will be chosen based on the product's mechanical properties and thermal conductivity.

The compressive stress of PAROC ROS 30 is 30 kPa, which means that the slab can carry a 3000 kg/m2 load during installation and use. This means that it is suitable for normal level loads.

Roof slab PAROC ROS 30g has ventilation grooves in the surface of the board. These grooves enable the constant drying of the whole roof construction.

Technical parameters

Width x Length
1200*1800 mm
Thickness
40-250 mm
Compressive Stress at 10 % deformation CS(10), σ10
30 kPa
Reaction to Fire, Euroclass
A1
Thermal Conductivity λD
0,036 W/mK
Combustibility
Non-combustible
Point Load PL(5)
250 N

Paroc ROS 40

Roof slab PAROC ROS 40 is non-combustible stone wool insulation for use as a load bearing thermal insulation layer of existing and new flat roofs.

more
thumbnail Roof slab PAROC ROS 40 is non-combustible stone wool insulation for use as a load bearing thermal insulation layer of existing and new flat roofs.

The roof insulation slab is developed to provide sustainable, hard and fire safe bedding for rigid top insulation layers as well as insulating the bearing layer in renovation sites. The suitable roof slab for flat roof will be chosen based on the product's mechanical properties and thermal conductivity.

The compressive stress of PAROC ROS 40 is 40 kPa, which means that the slab can carry a 4000 kg/m2 load during installation and use. This means that it is suitable for normal level loads.

Roof slab PAROC ROS 40g is equipped with ventilation grooves on the upper side. These grooves enable the constant drying of the whole roof construction.

Technical parameters

Width x Length
1200*1800 mm
Thickness
40-180 mm
Compressive Stress at 10 % deformation CS(10), σ10
40 kPa
Reaction to Fire, Euroclass
A1
Thermal Conductivity λD
0,037 W/mK
Water Vapour Transmission MU, µ
1
Point Load PL(5)
350 N
Combustibility
Non-combustible

PAROC ROS 50

Roof slab PAROC ROS 50 is non-combustible stone wool insulation for use as a load bearing thermal insulation layer of existing and new flat roofs.

more
thumbnail Roof slab PAROC ROS 50 is non-combustible stone wool insulation for use as a load bearing thermal insulation layer of existing and new flat roofs.

The roof insulation slab is developed to provide sustainable, hard and fire safe bedding for most types of flat roof coverings as well as insulating the bearing layer in renovation sites.

PAROC ROS 50 insulation is used in concrete and corrugated steel constructions as a single-layer insulation. The thickness of the insulation layer should be below 150 mm.

The compressive stress of the product is 50 kPa, which means that the slab can carry a 5000 kg/m2 load during installation and use.

Technical parameters

Width x Length
1200*1800 mm
Thickness
40-100 mm
Compressive Stress at 10 % deformation CS(10), σ10
50 kPa
Reaction to Fire, Euroclass
A1
Thermal Conductivity λD
0,038 W/mK
Water Vapour Transmission MU, µ
1
Point Load PL(5)
450 N
Combustibility
Non-combustible

PAROC ROS 60

Roof slab PAROC ROS 60 is non-combustible stone wool insulation for use as a load bearing thermal insulation layer of existing and new flat roofs.

more
thumbnail Roof slab PAROC ROS 60 is non-combustible stone wool insulation for use as a load bearing thermal insulation layer of existing and new flat roofs.

The roof insulation slab is developed to provide sustainable, hard and fire safe bedding for most types of flat roof coverings as well as insulating the bearing layer in renovation sites.

PAROC ROS 60 insulation is used in concrete and corrugated steel constructions as a single-layer insulation. The thickness of the insulation layer should be below 120 mm.

The compressive stress of the product is 60 kPa, which means that the slab can carry a 6000 kg/m2 load during installation and use. This means that it is suitable for high level loads.

Technical parameters

Width x Length
1200*1800 mm
Thickness
40-130 mm
Compressive Stress at 10 % deformation CS(10), σ10
60 kPa
Tensile Strength Perpendicular to Faces TR, σmt
10 kPa
Reaction to Fire, Euroclass
A1
Combustibility
Non-combustible
Thermal Conductivity λD
0,039 W/mK
Point Load PL(5)
550 N

PAROC ROB 60

Roof board PAROC ROB 60 is non-combustible stone wool insulation for use as a top layer of existing and new flat roofs.

more
thumbnail Roof board PAROC ROB 60 is non-combustible stone wool insulation for use as a top layer of existing and new flat roofs.

The roof insulation board is developed to provide sustainable, hard and fire safe bedding for most types of flat roof coverings as well as insulating the bearing layer in renovation sites.

The compressive stress of the product is 60 kPa, which means that the slab can carry a 6000 kg/m2 load during installation and use.

Technical parameters

Width x Length
1200*1800 mm
Thickness
20-30 mm
Compressive Stress at 10 % deformation CS(10), σ10
60 kPa
Tensile Strength Perpendicular to Faces TR, σmt
10 kPa
Reaction to Fire, Euroclass
A1
Thermal Conductivity λD
0,038 W/mK
Point Load PL(5)
550 N
Combustibility
Non-combustible
Air Permeability Coefficient, ℓ
15 x 10-6 m3/m²sPa
Water Vapour Transmission MU, µ
1

PAROC ROB 80

Roof board PAROC ROB 80 is non-combustible stone wool insulation for use as a top layer of existing and new flat roofs.

more
thumbnail Roof board PAROC ROB 80 - is non-combustible stone wool insulation for use as a top layer of existing and new flat roofs.

The roof insulation board is developed to provide sustainable, hard and fire safe bedding for most types of flat roof coverings as well as insulating the bearing layer in renovation sites.

The compressive stress of the product is 80kPa, which means that the slab can carry a 8000kg/m2 load during installation and use.

PAROC ROB 80t - The roof board is faced with natural coloured glass fibre tissue.

Technical parameters

Width x Length
1200*1800 (600*1200) mm
Thickness
20-30 mm
Reaction to Fire, Euroclass
A1
Combustibility
Non-combustible
Compressive Stress at 10 % deformation CS(10), σ10
80 kPa
Tensile Strength Perpendicular to Faces TR, σmt
10 kPa
Thermal Conductivity λD
0,038 W/mK
Point Load PL(5)
700 N
Water Vapour Transmission MU, µ
1



8 (800) 707-53-99 Звонок по России бесплатный
firm@sevren.ru