Fire-resistant materials – Northern Renaissance
+7 (812) 777 53 99+7 (812) 928 53 998 (800) 707-53-99 Звонок по России бесплатный

Basalt fire-resistant roll material (MBOR)

Basalt fire-resistant roll material is a stitched canvas made of basalt super-thin fibers without binder

more
thumbnail MBOR (Basalt fire-resistant roll material) is a stitched canvas made of basalt super-thin fibers without binder, with or without coating.

MBOR-5, 8, 10, 13, 16 - uncoated material

MBOR-5Ф, 8Ф, 10Ф, 13Ф, 16Ф, 18Ф, 20Ф, 23Ф, 26Ф  - aluminum foil coated material

MBOR-С-5, 8, 10, 13, 16, 18, 20 - material with fiberglass coating on one side

MBOR-С2-5, 8, 10, 13, 16, 18, 20 - material with fiberglass coating on both sides 

Technical parameters

Flammability group
non-combustible
Application temperature
-200...+900 °С
Density, kg/m3
100 ±10%
Thermal Conductivity in 25 °C, λ25
0,033 W/m*K
Thermal Conductivity in 125 °C, λ125
0,051 W/m*K
Thermal Conductivity in 300 °C, λ300
0,09 W/m*K

Isotec Fire Protect – Concrete (110)

Heat insulation and fire protection mineral wool products rectangular in shape and cross-section.

more
thumbnail Isotec Fire Protect Heat insulation and fire protection mineral wool products rectangular in shape and cross-section.

ISOTEC Fire Protect Concrete is used as heat insulation and fire protection of reinforcedconcrete slabs of floor structures, columns, frame works in engineering and enclosing envelopes of buildings and constructions. The slab can withstand the compressive loads of up to 25kPa.

Fire-resistance rating - REI 240.

Technical parameters

Density
110 kg/m3
Width
600 mm
Length
1000 mm
Thickness
30-200 mm
Fire hazard class
КМ0
Flammability group
Noncombustible
Maximum Service Temperature
660°C
Thermal Conductivity in 10 °C, λ10
0,036 W/m*K
Thermal Conductivity in 25 °C, λ25
0,038 W/m*K
Thermal Conductivity in 50 °C, λ50
0,041 W/m*K
Thermal Conductivity in 100 °C, λ100
0,047 W/m*K
Thermal Conductivity in 125 °C, λ125
0,050 W/m*K
Thermal Conductivity in 150 °C, λ150
0,056 W/m*K
Thermal Conductivity in 200 °C, λ200
0,067 W/m*K
Thermal Conductivity in 250 °C, λ250
0,079 W/m*K
Thermal Conductivity in 300 °C, λ300
0,090 W/m*K

Isotec Wired Mat 80

Flexible heat insulating products with the mantle made of a mesh mechanically joined with heat insulating material.

more
thumbnail Isotec Wired Mat 80 - Flexible heat insulating products with the mantle made of a mesh mechanically joined with heat insulating material. May come with coating made of aluminium armoured foil the aluminium thickness of up to 20 μm (ISOTEC Wired mat80-AL and ISOTEC Wired mat100-AL) and coated with aluminium foil thick from 20 to 40 μm without armouring (ISOTEC Wired mat80-AL2).

Application: Heat insulation and fire protection of flat, cylindrical, conical and other convoluted surfaces of process and power equipment, pipelines, air ducts, gas ducts, smoke exhaust systems and other objects.

Fire-resistance rating of steel air ducts with coating made of wired mats ISOTEC Wired Mat 80:

Coating thickness, mm Fire-resistance rating, El
30 60
40 90
50 120
60 150
70 180
80 240

Technical parameters

Density, kg/m3
80
Maximum service temperature
660
Thermal Conductivity in 10 °C, λ10
0,034
Thermal Conductivity in 25 °C, λ25
0,035
Thermal Conductivity in 50 °C, λ50
0,038
Thermal Conductivity in 100 °C, λ100
0,044
Thermal Conductivity in 125 °C, λ125
0,047
Thermal Conductivity in 150 °C, λ150
0,053
Thermal Conductivity in 200 °C, λ200
0,064
Thermal Conductivity in 250 °C, λ250
0,075
Thermal Conductivity in 300 °C, λ300
0,085
Fire hazard class
НГ (КМ0)
Width, mm
1000
Lenght, mm
2000 - 5000
Thickness, mm
30-120

Isotec Wired Mat 100

Flexible heat insulating products with the mantle made of a mesh mechanically joined with heat insulating material.

more
thumbnail Isotec Wired Mat 100 - Flexible heat insulating products with the mantle made of a mesh mechanically joined with heat insulating material. May come with coating made of aluminium armoured foil the aluminium thickness of up to 20 μm (ISOTEC Wired mat80-AL and ISOTEC Wired mat100-AL) and coated with aluminium foil thick from 20 to 40 μm without armouring (ISOTEC Wired mat80-AL2).

Application: Heat insulation and fire protection of flat, cylindrical, conical and other convoluted surfaces of process and power equipment, pipelines, air ducts, gas ducts, smoke exhaust systems and other objects.

Fire-resistance rating of steel air ducts with coating made of wired mats ISOTEC Wired Mat 100:

Coating thickness, mm Fire-resistance rating, El
30 90
40 120
50 150
60 180
70 240

Technical parameters

Density, kg/m3
100
Maximum service temperature
680
Thermal Conductivity in 10 °C, λ10
0,034
Thermal Conductivity in 25 °C, λ25
0,036
Thermal Conductivity in 50 °C, λ50
0,039
Thermal Conductivity in 100 °C, λ100
0,044
Thermal Conductivity in 125 °C, λ125
0,046
Thermal Conductivity in 150 °C, λ150
0,051
Thermal Conductivity in 200 °C, λ200
0,060
Thermal Conductivity in 250 °C, λ250
0,070
Thermal Conductivity in 300 °C, λ300
0,078
Fire hazard class
НГ (КМ0)
Width, mm
1000
Lenght, mm
2000 - 5000
Thickness, mm
30-120

PAROC FPS 17

Fire protection slab PAROC FPS 17 is non-combustible stone wool insulation for use as fire protection for steel structures, chimneys, doors, furnaces and ovens.

more
thumbnail Fire protection slab PAROC FPS 17 is non-combustible stone wool insulation for use as fire protection for steel structures, chimneys, doors, furnaces and ovens.

Stone wool insulation has varying fire protection abilities that are largely dependant on the density of the material as well as the used insulation thickness. Generally speaking, the higher the density, the longer the fire protection time.

PAROC FPS 17 has a density of ~170 kg/m3. The right product for the application will be chosen based on the system provider's approval. PAROC FPS 17 has ETA approval for fire protection for steel structures. The product is easy to handle and install for different kinds of fire applications.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200 °C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000 °C.

Technical parameters

Nominal Density
170 kg/m3
Width
600 mm
Length
1200 mm
Thickness
20-120 mm
Reaction to Fire, Euroclass
A1
Combustibility
Non-combustible
Thermal Conductivity λD
0,038 W/mK

PAROC Pro Wired Mat 80 AL1

PAROC Pro Wired Mat 80 AL1 is a non-combustible stone wool mat with aluminium foil facing. It is very commonly used for thermal insulation of cylindrical, conic and level surfaces in different industrial applications.

more
thumbnail PAROC Pro Wired Mat 80 AL1 is a non-combustible stone wool mat with aluminium foil facing. It is very commonly used for thermal insulation of cylindrical, conic and level surfaces in different industrial applications. At high temperatures the aluminium foil facing is of significance for insulating the radiation heat.

PAROC Pro Wired Mat 80 AL1 is a non-combustible stone wool mat with aluminium foil facing. It is very commonly used for thermal insulation of cylindrical, conic and level surfaces in different industrial applications. At high temperatures the aluminium foil facing is of significance for insulating the radiation heat.

Technical parameters

Nominal Density
80 kg/m³
Width
1200 mm
Length
depending on thickness
Thickness
30-120 mm
Reaction to Fire, Euroclass
A1
Thermal Conductivity in 10 °C, λ10
0,033 W/mK

PAROC Pro Wired Mat 100 AL1

PAROC Pro Wired Mat 100 AL1 is a non-combustible stone wool mat with aluminium foil facing. It is very commonly used for thermal insulation of cylindrical, conic and level surfaces in different industrial applications.

more
thumbnail PAROC Pro Wired Mat 100 AL1 is a non-combustible stone wool mat with aluminium foil facing. It is very commonly used for thermal insulation of cylindrical, conic and level surfaces in different industrial applications. At high temperatures the aluminium foil facing is of significance for insulating the radiation heat.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Technical parameters

Nominal Density
100 kg/m³
Width
1200 mm
Length
depending on thickness
Thickness
30-120 mm
Reaction to Fire, Euroclass
A1
Thermal Conductivity in 10 °C, λ10
0,034 W/mK

PAROC FPS 14

Fire protection slab PAROC FPS 14 is non-combustible stone wool insulation for use as fire protection for steel structures, chimneys, doors, furnaces and ovens.

more
thumbnail Fire protection slab PAROC FPS 14 is non-combustible stone wool insulation for use as fire protection for steel structures, chimneys, doors, furnaces and ovens.

Stone wool insulation has varying fire protection abilities that are largely dependant on the density of the material as well as the used insulation thickness. Generally speaking, the higher the density, the longer the fire protection time.

PAROC FPS 14 has a density of ~140 kg/m3. The right product for the application will be chosen based on the system provider's approval. The product is easy to handle and install for different kinds of fire applications.

Technical parameters

Nominal Density
140 kg/m³
Width
600 mm
Length
1200 mm
Thickness
20-120 mm
Reaction to Fire, Euroclass
A1
Thermal Conductivity λD
0,037 W/mK
Combustibility
Non-combustible

PAROC CGL 20

Ceiling lamella is non-combustible stone wool insulation for existing and new cellar ceilings.

more
thumbnail Ceiling lamella PAROC CGL 20 is non-combustible stone wool insulation for existing and new cellar ceilings. With ceiling insulation lamella you can easily insulate cellar ceilings, creating good sound absorption for the space and increasing fire safety between floors.

PAROC CGL 20cy - Glued lamella insulation with faceted edges forms a structured base layer for the ceiling surface. The visible surface of the lamella is pre-painted/coated for better application of the paint.

PAROC CGL 20cyc - Glued lamella insulation with faceted edges forms a structured base layer for the ceiling surface. The lamella is pre-painted/coated on both sides.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Technical parameters

Length
1200 mm
Width
200 mm
Thickness
50-200 mm
Reaction to Fire, Euroclass
A1
Combustibility
Non-combustible
Compressive Strength CS(Y), σm
20 kPa
Thermal Conductivity λD
0,037 W/mK
Air Flow Resistivity AFR
10 kPa*s/m²
Water Absorption, Short Term WS, Wp
≤ 1 kg/m²
Water Absorption, Long Term WL(P), Wlp
≤ 3 kg/m²



8 (800) 707-53-99 Звонок по России бесплатный
firm@sevren.ru