Stone wool – Northern Renaissance
+7 (812) 777 53 99+7 (812) 928 53 998 (800) 707-53-99 Звонок по России бесплатный

PAROC Pro Section 100

PAROC Pro Section 100 is a non-combustible stone wool pipe section for industrial pipe lines. PAROC pipe sections possess excellent compression strength and easily carry the weight of metal claddings.

more
thumbnail PAROC Pro Section 100 is a non-combustible stone wool pipe section for industrial pipe lines. PAROC pipe sections possess excellent compression strength and easily carry the weight of metal claddings. Hence, they eliminate the energy loss and thermal bridges caused by added cladding support structures and minimize the risk of damages from mechanical impacts.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Technical parameters

Nominal Density
100 kg/m³
Maximum service temperature
640 °С
Thickness
20-160 mm
Inner Diameter
12-1016 mm
Pipe Section Length
1200 mm
Reaction to Fire, Euroclass
A1L
Fire Classification (IMO)
Non-combustible
Теплопроводность при 10 °C, λ10
0,034 W/mK
Thermal Conductivity in 50 °C, λ50
0,039 W/mK
Thermal Conductivity in 100 °C, λ100
0,045 W/mK
Thermal Conductivity in 125 °C, λ125
0,047 W/mK
Thermal Conductivity in 200 °C, λ200
0.064 W/mK
Thermal Conductivity in 300 °C, λ300
0.092 W/mK
Thermal Conductivity in 400 °C, λ400
0,116 W/mK
Thermal Conductivity in 500 °C, λ500
0,157 W/mK
Water Absorption, Short Term WS, Wp
≤ 1 kg/m²

PAROC Hvac Section AluCoat T

PAROC Hvac Section AluCoat T is a non-combustible stone wool pipe section for thermal and condensation insulation of pipework and air ducts in buildings and ships. It has a reinforced aluminium foil facing and tape in the longitudinal seam which prevents condensation and gives a quick installation.

more
thumbnail PAROC Hvac Section AluCoat T is a non-combustible stone wool pipe section for thermal and condensation insulation of pipework and air ducts in buildings and ships. It has a reinforced aluminium foil facing and tape in the longitudinal seam which prevents condensation and gives a quick installation.

Surface temperature of the facing must not exceed +80°C (temperature restriction determined in accordance with heat resistance of adhesive).

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Technical parameters

Nominal Density
100 kg/m³
Maximum service temperature
250 °С
Thickness
20-160 mm
Inner Diameter
12-1016 mm
Reaction to Fire, Euroclass
A2L - s1, d0
Fire Classification (IMO)
Non-combustible
Surface Flammability (IMO)
Low flame-spread charasteristics
Combustibility
Base product non-combustible
Thermal Conductivity in 10 °C, λ10
0,033 W/mK
Thermal Conductivity in 50 °C, λ50
0,037 W/mK
Thermal Conductivity in 100 °C, λ100
0,044 W/mK
Теплопроводность при 125 °C, λ125
0,047 W/mK
Thermal Conductivity in 150 °C, λ150
0,053 W/mK
Thermal Conductivity in 200 °C, λ200
0,064 W/mK
Thermal Conductivity in 250 °C, λ250
0,077 W/mK

PAROC Pro Section 140

PAROC Pro Section 140 is a non-combustible stone wool pipe section for industrial pipe lines. PAROC pipe sections possess excellent compression strength and easily carry the weight of metal claddings. Hence, they eliminate the energy loss and thermal bridges caused by added cladding support structures and minimize the risk of damages from mechanical impacts.

more
thumbnail PAROC Pro Section 140 is a non-combustible stone wool pipe section for industrial pipe lines. PAROC pipe sections possess excellent compression strength and easily carry the weight of metal claddings. Hence, they eliminate the energy loss and thermal bridges caused by added cladding support structures and minimize the risk of damages from mechanical impacts.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Technical parameters

Nominal Density
140 kg/m³
Maximum service temperature
680 °С
Thickness
20-160 mm
Inner Diameter
12-1016 mm
Pipe Section Length
1200 mm
Reaction to Fire, Euroclass
A1
Fire Classification (IMO)
Non-combustible
Thermal Conductivity in 10 °C, λ10
0,037 W/mK
Thermal Conductivity in 50 °C, λ50
0,041 W/mK
Thermal Conductivity in 100 °C, λ100
0,047 W/mK
Thermal Conductivity in 150 °C, λ150
0,054 W/mK
Thermal Conductivity in 200 °C, λ200
0,063 W/mK
Thermal Conductivity in 250 °C, λ250
0,073 W/mK
Thermal Conductivity in 300 °C, λ300
0,085 W/mK
Thermal Conductivity in 400 °C, λ400
0,110 W/mK
Water Absorption, Short Term WS, Wp
≤ 1 kg/m²

PAROC Marine Wired Mat 80

PAROC Marine Wired Mat 80 is a non-combustible stone wool wired mat for fire protection on ships. It is used in A30 and A15 constructions for Steel Decks and A15 constructions for Steel Bulkheads.

more
thumbnail PAROC Marine Wired Mat 80 is a non-combustible stone wool wired mat for fire protection on ships. It is used in A30 and A15 constructions for Steel Decks and A15 constructions for Steel Bulkheads.

Application:
  • Decks and bulkheads in steel and aluminium constructions.
  • Circular ducts.
  • Wall cassettes.
  • Air-conditioning devices and ducts.
  • Products with facing above suspended ceilings and in maintenance facilities.
  • Exhaust gas dampers.
  • Large pipe elbows
  • Penetrations of air ducts.

Facings:
  • ALUCOAT - reinforced aluminium foil facing, 62-80 g/m2;
  • G1 - white glass fibre facing, ~ 210 g/m2;
  • G2 - black glass fibre facing, ~ 200 g/m2;
  • G4 - white glass fibre facing with aluminium below, ~ 250 g/m2;
  • G7 - white glass fibre clothing with aluminium facing on top, ~ 250 g/m2.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Technical parameters

Nominal Density
80 kg/m³
Fire Classification (IMO)
Non-Combustible
Maximum service temperature
+640 °С
Thermal Conductivity in 10 °C, λ10
0,036 W/mK
Thermal Conductivity in 50 °C, λ50
0,040 W/mK
Thermal Conductivity in 100 °C, λ100
0,046 W/mK
Thermal Conductivity in 200 °C, λ200
0,064 W/mK
Thermal Conductivity in 300 °C, λ300
0,089 W/mK
Water Absorption Short Term WS, Wp
≤ 1 kg/m²

PAROC Marine Wired Mat 100

PAROC Marine Wired Mat 100 is a non-combustible stone wool wired mat for fire protection on ships. It is commonly used in A-class constructions for Steel and Aluminium Decks and Bulkheads.

more
thumbnail PAROC Marine Wired Mat 100 is a non-combustible stone wool wired mat for fire protection on ships. It is commonly used in A-class constructions for Steel and Aluminium Decks and Bulkheads..

Application:
  • Decks and bulkheads in steel and aluminium constructions.
  • Circular ducts.
  • Wall cassettes.
  • Air-conditioning devices and ducts.
  • Products with facing above suspended ceilings and in maintenance facilities.
  • Exhaust gas dampers.
  • Large pipe elbows
  • Penetrations of air ducts.

Facings:
  • ALUCOAT - reinforced aluminium foil facing, 62-80 g/m2;
  • G1 - white glass fibre facing, ~ 210 g/m2;
  • G2 - black glass fibre facing, ~ 200 g/m2;
  • G4 - white glass fibre facing with aluminium below, ~ 250 g/m2;
  • G7 - white glass fibre clothing with aluminium facing on top, ~ 250 g/m2.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Technical parameters

Nominal Density
100 kg/m³
Fire Classification (IMO)
Non-Combustible
Maximum service temperature
+660 °С
Thermal Conductivity in 10 °C, λ10
0,039 W/mK
Thermal Conductivity in 50 °C, λ50
0,042 W/mK
Thermal Conductivity in 100 °C, λ100
0,047 W/mK
Thermal Conductivity in 200 °C, λ200
0,063 W/mK
Thermal Conductivity in 300 °C, λ300
0,083 W/mK
Water Absorption Short Term WS, Wp
≤ 1 kg/m²

PAROC Marine Mat 30

PAROC Marine Mat 35 is a non-combustible stone wool mat for thermal insulation on ships.

more
thumbnail PAROC Marine Mat 30 is a non-combustible stone wool nat for thermal insulation on ships.

Application:
  • Thermal and condensation insulation of ducts and devices.
  • Machinery and devices.

Facings:
  • ALUCOAT - reinforced aluminium foil facing, 62-80 g/m2;
  • G4 - white glass fibre facing with aluminium below, ~ 250 g/m2;
  • G7 - white glass fibre clothing with aluminium facing on top, ~ 250 g/m2.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Technical parameters

Nominal Density
30 kg/m³
Fire Classification (IMO)
Non-Combustible
Maximum service temperature
+250 °С
Thermal Conductivity in 10 °C, λ10
0,036 W/mK
Water Absorption Short Term WS, Wp
≤ 1 kg/m²

PAROC Marine Mat 35 AluCoat

PAROC Marine Mat 35 is a non-combustible stone wool mat for thermal insulation on ships.

more
thumbnail PAROC Marine Mat 35 AluCoat is a non-combustible stone wool mat for thermal insulation on ships.

Application:
  • Thermal and condensation insulation of ducts and devices.
  • Machinery and devices.

Facings:
  • ALUCOAT - reinforced aluminium foil facing, 62-80 g/m2;

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Technical parameters

Nominal Density
35 kg/m³
Fire Classification (IMO)
Non-Combustible
Maximum service temperature
+250 °С
Thermal Conductivity in 10 °C, λ10
0,036 W/mK
Water Absorption Short Term WS, Wp
≤ 1 kg/m²

PAROC Marine Slab 30

PAROC Marine Slab 30 is a non-combustible stone wool slab for thermal insulation on ships.

more
thumbnail PAROC Marine Slab 40 is a non-combustible stone wool slab for thermal insulation on ships.

Application:
  • Various applications.
  • Devices and tanks with flat surfaces.
  • Sound insulation above suspended ceilings.
  • With aluminium foil as condensation insulation and in applications where thick insulation is required.
  • Products with facing in facilities where they remain visible.
  • Machinery and devices.

Facings:
  • ALUCOAT - reinforced aluminium foil facing, 62-80 g/m2;

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Technical parameters

Nominal Density
30 kg/m³
Maximum service temperature
+250 °C
Fire Classification (IMO)
Non-Combustible
Thermal Conductivity in 10 °C, λ10
0,039 W/mK
Thermal Conductivity in 50 °C, λ50
0,042 W/mK
Thermal Conductivity in 100 °C, λ100
0,054 W/mK
Thermal Conductivity in 200 °C, λ200
0.085 W/mK
Thermal Conductivity in 300 °C, λ300
0.132 W/mK
Water Absorption Short Term WS, Wp
≤ 1 kg/m²

PAROC Marine Slab 40

PAROC Marine Slab 40 is a non-combustible stone wool slab for thermal insulation on ships.

more
thumbnail PAROC Marine Slab 40 is a non-combustible stone wool slab for thermal insulation on ships.

Application:
  • Various applications.
  • Devices and tanks with flat surfaces.
  • Sound insulation above suspended ceilings.
  • With aluminium foil as condensation insulation and in applications where thick insulation is required.
  • Products with facing in facilities where they remain visible.
  • Machinery and devices.

Facings:
  • ALUCOAT - reinforced aluminium foil facing, 62-80 g/m2;
  • G1 - white glass fibre facing, ~ 210 g/m2;
  • G2 - black glass fibre facing, ~ 200 g/m2;
  • G3 - white glass fibre facing, ~ 430 g/m2
  • G4 - white glass fibre facing with aluminium below, ~ 250 g/m2;
  • G7 - white glass fibre clothing with aluminium facing on top, ~ 250 g/m2.
  • N1 - grey non-woven tissue, ~ 50 g/m2.
  • N3 - black non-woven tissue, ~ 60 g/m2.
  • N5 - grey non-woven tissue, ~ 60 г/м2.
  • LF1 - lacquered aluminium laminate with glass fibre reinforcement, ~ 97 г/м2.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Technical parameters

Nominal Density
40 kg/m³
Maximum service temperature
+350 °C
Fire Classification (IMO)
Non-Combustible
Thermal Conductivity in 10 °C, λ10
0,037 W/mK
Thermal Conductivity in 50 °C, λ50
0,042 W/mK
Thermal Conductivity in 100 °C, λ100
0,054 W/mK
Thermal Conductivity in 200 °C, λ200
0.085 W/mK
Compressive stress (10% deformation)
1 kPa

PAROC Marine Slab 60

PAROC Marine Slab 60 is a non-combustible stone wool slab for thermal insulation on ships.

more
thumbnail PAROC Marine Slab 60 is a non-combustible stone wool slab for thermal insulation on ships.

Application:
  • Decks and bulkheads in steel and aluminium constructions.
  • Fire doors.
  • Wall cassettes.
  • Air-conditioning devices and ducts.
  • Products with facing especially for car decks, engine rooms and air-conditioning machine rooms.

Facings:
  • ALUCOAT - reinforced aluminium foil facing, 62-80 g/m2;
  • G1 - white glass fibre facing, ~ 210 g/m2;
  • G2 - black glass fibre facing, ~ 200 g/m2;
  • G3 - white glass fibre facing, ~ 430 g/m2
  • G4 - white glass fibre facing with aluminium below, ~ 250 g/m2;
  • G7 - white glass fibre clothing with aluminium facing on top, ~ 250 g/m2.
  • N1 - grey non-woven tissue, ~ 50 g/m2.
  • N3 - black non-woven tissue, ~ 60 g/m2.
  • N5 - grey non-woven tissue, ~ 60 г/м2.
  • LF1 - lacquered aluminium laminate with glass fibre reinforcement, ~ 97 г/м2.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Technical parameters

Nominal Density
60 kg/m³
Maximum service temperature
+350 °C
Fire Classification (IMO)
Non-Combustible
Thermal Conductivity in 10 °C, λ10
0,037 W/mK
Thermal Conductivity in 50 °C, λ50
0,042 W/mK
Thermal Conductivity in 100 °C, λ100
0,048 W/mK
Thermal Conductivity in 200 °C, λ200
0.067 W/mK
Compressive stress (10% deformation)
3 kPa

PAROC Marine Slab 80

PAROC Marine Slab 80 is a non-combustible stone wool slab for fire and thermal insulation on ships.

more
thumbnail PAROC Marine Slab 80 is a non-combustible stone wool slab for fire and thermal insulation on ships.

Application:
  • Decks and bulkheads in steel and aluminium constructions.
  • Fire doors.
  • Wall cassettes.
  • Air-conditioning devices and ducts.
  • Products with facing especially for car decks, engine rooms and air-conditioning machine rooms.

Facings:
  • ALUCOAT - reinforced aluminium foil facing, 62-80 g/m2;
  • G1 - white glass fibre facing, ~ 210 g/m2;
  • G2 - black glass fibre facing, ~ 200 g/m2;
  • G3 - white glass fibre facing, ~ 430 g/m2
  • G4 - white glass fibre facing with aluminium below, ~ 250 g/m2;
  • G7 - white glass fibre clothing with aluminium facing on top, ~ 250 g/m2.
  • N1 - grey non-woven tissue, ~ 50 g/m2.
  • N3 - black non-woven tissue, ~ 60 g/m2.
  • N5 - grey non-woven tissue, ~ 60 г/м2.
  • LF1 - lacquered aluminium laminate with glass fibre reinforcement, ~ 97 г/м2.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Technical parameters

Nominal Density
80 kg/m³
Maximum service temperature
+550 °C
Fire Classification (IMO)
Non-Combustible
Thermal Conductivity in 10 °C, λ10
0,037 W/mK
Thermal Conductivity in 50 °C, λ50
0,043 W/mK
Thermal Conductivity in 100 °C, λ100
0,047 W/mK
Thermal Conductivity in 200 °C, λ200
0.065 W/mK
Thermal Conductivity in 300 °C, λ300
0,095 W/mK
Thermal Conductivity in 400 °C, λ400
0,138 W/mK
Thermal Conductivity in 500 °C, λ500
0,196 W/mK
Compressive stress (10% deformation)
10 kPa
Water Absorption Short Term WS, Wp
≤ 1 kg/m²

PAROC Marine Fire Slab 80

PAROC Marine Slab 80 is a non-combustible stone wool slab for fire protection and thermal insulation on ships.

more
thumbnail PAROC Marine Fire Slab 80 is a non-combustible stone wool slab for fire protection and thermal insulation on ships.

Application:
  • Decks and bulkheads in steel and aluminium constructions.
  • Fire doors.
  • Wall cassettes.
  • Air-conditioning devices and ducts.
  • Products with facing especially for car decks, engine rooms and air-conditioning machine rooms.

Facings:
  • ALUCOAT - reinforced aluminium foil facing, 62-80 g/m2;
  • G1 - white glass fibre facing, ~ 210 g/m2;
  • G2 - black glass fibre facing, ~ 200 g/m2;
  • G3 - white glass fibre facing, ~ 430 g/m2
  • G4 - white glass fibre facing with aluminium below, ~ 250 g/m2;
  • G7 - white glass fibre clothing with aluminium facing on top, ~ 250 g/m2.
  • N1 - grey non-woven tissue, ~ 50 g/m2.
  • N3 - black non-woven tissue, ~ 60 g/m2.
  • N5 - grey non-woven tissue, ~ 60 г/м2.
  • LF1 - lacquered aluminium laminate with glass fibre reinforcement, ~ 97 г/м2.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Technical parameters

Nominal Density
80 kg/m³
Maximum service temperature
+550 °C
Fire Classification (IMO)
Non-Combustible
Thermal Conductivity in 10 °C, λ10
0,037 W/mK
Thermal Conductivity in 50 °C, λ50
0,043 W/mK
Thermal Conductivity in 100 °C, λ100
0,047 W/mK
Thermal Conductivity in 200 °C, λ200
0.065 W/mK
Thermal Conductivity in 300 °C, λ300
0,095 W/mK
Thermal Conductivity in 400 °C, λ400
0,138 W/mK
Thermal Conductivity in 500 °C, λ500
0,196 W/mK
Compressive stress (10% deformation)
10 kPa
Water Absorption Short Term WS, Wp
≤ 1 kg/m²

PAROC Marine Fire Slab 100

PAROC Marine Fire Slab 100 is a non-combustible stone wool slab for fire protection on ships. It is commonly used in A-and H-class constructions for Steel and Aluminium Decks and Bulkheads.

more
thumbnail PAROC Marine Fire Slab 100 is a non-combustible stone wool slab for fire protection on ships. It is commonly used in A-and H-class constructions for Steel and Aluminium Decks and Bulkheads.

Application:
  • Decks and bulkheads in steel and aluminium constructions.
  • Fire doors.
  • Wall cassettes.
  • Air-conditioning devices and ducts.
  • Products with facing especially for car decks, engine rooms and air-conditioning machine rooms.

Facings:
  • ALUCOAT - reinforced aluminium foil facing, 62-80 g/m2;
  • G1 - white glass fibre facing, ~ 210 g/m2;
  • G2 - black glass fibre facing, ~ 200 g/m2;
  • G3 - white glass fibre facing, ~ 430 g/m2
  • G4 - white glass fibre facing with aluminium below, ~ 250 g/m2;
  • G7 - white glass fibre clothing with aluminium facing on top, ~ 250 g/m2.
  • N1 - grey non-woven tissue, ~ 50 g/m2.
  • N3 - black non-woven tissue, ~ 60 g/m2.
  • N5 - grey non-woven tissue, ~ 60 г/м2.
  • LF1 - lacquered aluminium laminate with glass fibre reinforcement, ~ 97 г/м2.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Technical parameters

Nominal Density
100 kg/m³
Maximum service temperature
+550 °C
Fire Classification (IMO)
Non-Combustible
Reaction to Fire, Euroclass
A1
Thermal Conductivity in 10 °C, λ10
0,037 W/mK
Thermal Conductivity in 50 °C, λ50
0,043 W/mK
Thermal Conductivity in 100 °C, λ100
0,047 W/mK
Thermal Conductivity in 200 °C, λ200
0.065 W/mK
Thermal Conductivity in 300 °C, λ300
0,095 W/mK
Thermal Conductivity in 400 °C, λ400
0,138 W/mK
Thermal Conductivity in 500 °C, λ500
0,196 W/mK
Compressive stress (10% deformation)
10 kPa
Water Absorption, Short Term WS, Wp
≤ 1 kg/m²

PAROC Marine Slab 130

PAROC Marine Slab 130 is a non-combustible stone wool slab for fire and thermal insulation on ships.

more
thumbnail PAROC Marine Slab 130 is a non-combustible stone wool slab for fire and thermal insulation on ships.

Application:
  • Wall panels and cassettes.
  • Suspended ceiling panels.
  • Floating floors.
  • Fire doors.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Technical parameters

Nominal Density
130 kg/m³
Maximum service temperature
+660 °C
Fire Classification (IMO)
Non-Combustible
Reaction to Fire, Euroclass
A1
Thermal Conductivity in 50 °C, λ50
0,042 W/mK
Thermal Conductivity in 100 °C, λ100
0,046 W/mK
Thermal Conductivity in 200 °C, λ200
0.060 W/mK
Thermal Conductivity in 300 °C, λ300
0,081 W/mK
Thermal Conductivity in 400 °C, λ400
0,110 W/mK
Thermal Conductivity in 500 °C, λ500
0,147 W/mK
Thermal Conductivity in 600 °C, λ600
0,192 W/mK
Compressive stress (10% deformation)
20 kPa
Water Absorption, Short Term WS, Wp
≤ 1 kg/m²

PAROC Marine Floor Slab 140

PAROC Marine Floor Slab 140 is a non-combustible stone wool slab used for fire protection on ships in A60 Floating floor constructions.

more
thumbnail PAROC Marine Floor Slab 140 is a non-combustible stone wool slab used for fire protection on ships in A60 Floating floor constructions.

Application:
  • Wall panels and cassettes.
  • Suspended ceiling panels.
  • Floating floors.
  • Fire doors.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Technical parameters

Nominal Density
140 kg/m³
Макcимальная температура эксплуатации
+660 °C
Fire Classification (IMO)
Non-Combustible
Thermal Conductivity in 10 °C, λ10
0,036 W/mK
Thermal Conductivity in 50 °C, λ50
0,042 W/mK
Thermal Conductivity in 100 °C, λ100
0,046 W/mK
Thermal Conductivity in 200 °C, λ200
0.060 W/mK
Thermal Conductivity in 300 °C, λ300
0,081 W/mK
Thermal Conductivity in 400 °C, λ400
0,110 W/mK
Thermal Conductivity in 500 °C, λ500
0,147 W/mK
Thermal Conductivity in 600 °C, λ600
0,192 W/mK
Compressive Stress at 10 % deformation CS(10), σ10
≥ 20
Water Absorption Short Term WS, Wp
≤ 1 kg/m²

PAROC Marine Fire Slab 150

PAROC Marine Fire Slab 150 is a non-combustible stone wool slab for fire protection and thermal insulation on ships.

more
thumbnail PAROC Marine Fire Slab 150 - is a non-combustible stone wool slab for fire and thermal insulation on ships.

Application:
  • Wall panels and cassettes.
  • Suspended ceiling panels.
  • Floating floors.
  • Fire doors.

Facings:
  • ALUCOAT - reinforced aluminium foil facing, 62-80 g/m2;
  • G1 - white glass fibre facing, ~ 210 g/m2;
  • G2 - black glass fibre facing, ~ 200 g/m2;
  • G3 - white glass fibre facing, ~ 430 g/m2
  • G4 - white glass fibre facing with aluminium below, ~ 250 g/m2;
  • G7 - white glass fibre clothing with aluminium facing on top, ~ 250 g/m2.
  • N1 - grey non-woven tissue, ~ 50 g/m2.
  • N3 - black non-woven tissue, ~ 60 g/m2.
  • N5 - grey non-woven tissue, ~ 60 г/м2.
  • LF1 - lacquered aluminium laminate with glass fibre reinforcement, ~ 97 г/м2.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Technical parameters

Nominal Density
150 kg/m³
Maximum service temperature
+660 °C
Reaction to Fire, Euroclass
A1
Fire Classification (IMO)
Non-combustible
Thermal Conductivity in 50 °C, λ50
0,042 W/mK
Thermal Conductivity in 100 °C, λ100
0,046 W/mK
Thermal Conductivity in 200 °C, λ200
0.060 W/mK
Thermal Conductivity in 300 °C, λ300
0,081 W/mK
Thermal Conductivity in 400 °C, λ400
0,110 W/mK
Thermal Conductivity in 500 °C, λ500
0,147 W/mK
Thermal Conductivity in 600 °C, λ600
0,192 W/mK
Compressive stress (10% deformation)
20 kPa
Water Absorption, Short Term WS, Wp
≤ 1 kg/m²

PAROC Marine Slab 160

PAROC Marine Slab 160 is a non-combustible stone wool slab for fire and thermal insulation on ships.

more
thumbnail PAROC Marine Slab 160 is a non-combustible stone wool slab for fire and thermal insulation on ships.

Application:
  • Wall panels and cassettes.
  • Suspended ceiling panels.
  • Floating floors.
  • Fire doors.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Technical parameters

Nominal Density
160 kg/m³
Maximum service temperature
+660 °C
Fire Classification (IMO)
Non-combustible
Thermal Conductivity in 10 °C, λ10
0,039 W/mK
Thermal Conductivity in 50 °C, λ50
0,042 W/mK
Thermal Conductivity in 100 °C, λ100
0,046 W/mK
Thermal Conductivity in 200 °C, λ200
0.060 W/mK
Thermal Conductivity in 300 °C, λ300
0,081 W/mK
Thermal Conductivity in 400 °C, λ400
0,110 W/mK
Thermal Conductivity in 500 °C, λ500
0,147 W/mK
Thermal Conductivity in 600 °C, λ600
0,192 W/mK
Compressive stress (10% deformation)
40 kPa
Water Absorption, Short Term WS, Wp
≤ 1 kg/m²

PAROC Marine Slab 180

PAROC Marine Slab 180 is a non-combustible stone wool slab for fire and thermal insulation on ships.

more
thumbnail PAROC Marine Slab 180 - is a non-combustible stone wool slab for fire and thermal insulation on ships.

Application:
  • Wall panels and cassettes.
  • Suspended ceiling panels.
  • Floating floors.
  • Fire doors.

Facings:
  • N1 - grey non-woven tissue classified as a non-combustible surface material, ~ 50 г/м2.
  • N3 - black non-woven tissue classified as surface material with low flame-spread characteristics, ~ 60 г/м2.
  • N5 - grey non-woven tissue classified as surface material with low flame-spread characteristics, ~ 60 г/м2.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Technical parameters

Nominal Density
180 kg/m³
Maximum service temperature
+660 °C
Fire Classification (IMO)
Non-combustible
Thermal Conductivity in 10 °C, λ10
0,039 W/mK
Thermal Conductivity in 50 °C, λ50
0,042 W/mK
Thermal Conductivity in 100 °C, λ100
0,046 W/mK
Thermal Conductivity in 200 °C, λ200
0.060 W/mK
Thermal Conductivity in 300 °C, λ300
0,081 W/mK
Thermal Conductivity in 400 °C, λ400
0,110 W/mK
Thermal Conductivity in 500 °C, λ500
0,147 W/mK
Thermal Conductivity in 600 °C, λ600
0,192 W/mK
Compressive stress (10% deformation)
50 kPa

PAROC Marine Slab 220

PAROC Marine Slab 220 is a non-combustible stone wool slab for fire and thermal insulation on ships.

more
thumbnail PAROC Marine Slab 220 - is a non-combustible stone wool slab for fire and thermal insulation on ships.

Application:
  • Ship cabin constructions and cassettes.
  • Sound reduction panels.
  • Draught barriers.
  • Doors, wall and ceiling panels.

Facings:
  • N1 - grey non-woven tissue classified as a non-combustible surface material, ~ 50 г/м2.
  • N3 - black non-woven tissue classified as surface material with low flame-spread characteristics, ~ 60 г/м2.
  • N5 - grey non-woven tissue classified as surface material with low flame-spread characteristics, ~ 60 г/м2.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Technical parameters

Nominal Density
220 kg/m³
Maximum service temperature
+660 °C
Fire Classification (IMO)
Non-Combustible
Thermal Conductivity in 50 °C, λ50
0,047 W/mK
Thermal Conductivity in 100 °C, λ100
0,050 W/mK
Thermal Conductivity in 200 °C, λ200
0.058 W/mK
Thermal Conductivity in 300 °C, λ300
0,071 W/mK
Thermal Conductivity in 400 °C, λ400
0,087 W/mK
Thermal Conductivity in 500 °C, λ500
0,107 W/mK
Thermal Conductivity in 600 °C, λ600
0,131 W/mK
Compressive Stress at 10 % deformation CS(10), σ10
NPD
Dimensions and Tolerances
T5
Water Absorption, Short Term WS, Wp
≤ 1 kg/m²
Chloride Ions, Cl-
< 10 ppm

PAROC Marine Slab 250

PAROC Marine Slab 250 is a non-combustible stone wool slab for fire and thermal insulation on ships.

more
thumbnail PAROC Marine Slab 250 - is a non-combustible stone wool slab for fire and thermal insulation on ships.

Application:
  • Ship cabin constructions and cassettes.
  • Sound reduction panels.
  • Draught barriers.
  • Doors, wall and ceiling panels.

Facings:
  • N1 - grey non-woven tissue classified as a non-combustible surface material, ~ 50 г/м2.
  • N3 - black non-woven tissue classified as surface material with low flame-spread characteristics, ~ 60 г/м2.
  • N5 - grey non-woven tissue classified as surface material with low flame-spread characteristics, ~ 60 г/м2.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Technical parameters

Nominal Density
250 kg/m³
Maximum service temperature
+660°C
Fire Classification (IMO)
Non-Combustible
Thermal Conductivity in 50 °C, λ50
0,047 W/mK
Thermal Conductivity in 100 °C, λ100
0,050 W/mK
Thermal Conductivity in 200 °C, λ200
0.058 W/mK
Thermal Conductivity in 300 °C, λ300
0,071 W/mK
Thermal Conductivity in 400 °C, λ400
0,087 W/mK
Thermal Conductivity in 500 °C, λ500
0,107 W/mK
Thermal Conductivity in 600 °C, λ600
0,131 W/mK
Compressive Stress at 10 % deformation CS(10), σ10
NPD




    8 (800) 707-53-99 Звонок по России бесплатный
    firm@sevren.ru