Polyurethane foam Shells
are used for thermal insulation of housing and utilities pipelines, oil and gas pipelines, trench pipelines and heating mains. It has one of the lowest thermal conductivity coefficients among heat-insulating materials.
moreCoating Ru-Flex PVC
Solid gray, black or white rolled PVC coating with a smooth surface. The coating adheres well to all pre-insulated cylindrical surfaces.
moreCoating Ru-Flex METAL
Made of aluminum foil with fiberglass mesh. Designed for use in the production of reflective insulation, foil insulation and other technical purposes. Provides protection against mechanical damage.
moreCoating Ru-Flex ALU
Is a five-layer material of three layers of aluminum foil with a thickness of 9 microns each and two layers of PET film with a thickness of 20 microns each. Ru-Flex ALU is used as a covering layer on internal and external engineering systems, providing protection against mechanical damage and exposure to ultraviolet radiation.
moreCoating Ru-Flex PROM ALU
Is a combined material of PVC with a thickness of 270 microns, aluminum foil with a thickness of 9 microns and PET film with a thickness of 21 microns. It is intended for use as a cover layer of thermal insulation on objects located in the open air, rooms and tunnels.
moreCoating Ru-Flex PROM FORM
Composite material made of fiberglass, laminated with aluminum foil. It is used as a covering layer on objects located in rooms and tunnels. Provides protection against ultraviolet radiation and mechanical stress.
moreCoating Ru-Flex PROM POLYMER
It is used as a covering layer on objects located outdoors and exposed to increased exposure to aggressive environmental factors. Provides protection against ultraviolet radiation, aggressive environment, mechanical damage.
moreRu-flex angle tube
A ready-made technical solution that allows you to reduce the time of installation of insulation in difficult sections of the pipeline, is made on the basis of materials Ru-Flex ST, Ru-Flex VT, Ru-Flex EKO PHARM.
moreRu-flex T-tube
A ready-made technical solution that allows you to reduce the time of installation of insulation in difficult sections of the pipeline, is made on the basis of materials Ru-Flex ST, Ru-Flex VT, Ru-Flex EKO PHARM.
moreRu-Flex ECO PHARM
Technical thermal insulation based on foamed synthetic rubber, intended for surfaces with positive and negative temperatures, is used for objects with increased environmental safety requirements.
moreRu-Flex CRYO
Technical thermal insulation based on foamed synthetic rubber, intended for pipelines with positive and negative temperatures, except for facilities with increased requirements for the toxicity of combustion products
moreRu-Flex BP
Technical thermal insulation based on foamed synthetic rubber, intended for thermal insulation during ductless laying of pipelines in an underground or overground method.
moreRu-Flex VENT-SK
Thermal insulation material, with a self-adhesive coating applied in the factory, intended for insulation of ventilation and air conditioning systems (taking into account the permissible temperature range)
moreRu-Flex VT
Thermal insulation material designed to insulate surfaces with a temperature range from -200 to +150 °C.
moreRU-FLEX Cleaner
Used during installation to prepare the surfaces to be bonded, to dilute the thickened glue.
moreRU-FLEX 454 glue
One-component contact adhesive is designed for bonding heat-insulating materials and RU-FLEX coatings to each other and to metal.
moreBasalt fire-resistant roll material (MBOR)
Basalt fire-resistant roll material is a stitched canvas made of basalt super-thin fibers without binder
moreRu-flex ST
Technical heat-insulating material intended for the insulation of surfaces with a temperature range from -200 to +110 ° C, with the exception of objects with increased requirements for the toxicity of combustion products
moreArmaGel DT
Flexible aerogel insulation blanket for cryogenic and dual-temperature applications with operating temperatures from -180°C (-292°F) to +250°C (+482°F).
moreSTITCHED MATS FROM STAPLE FIBER (TIB)
TIB-stitched products made of staple basalt superfine fiber without a cover material or with a coating of fiberglass, basalt or silica fabric, stitched with threads.
moreHEAT AND SOUND INSULATING MATERIAL ATM-3
Heat and sound insulation material ATM-3 consists of a loose layer of super-thin staple glass fiber bonded with synthetic resin, lined from both sides with glass fabric and stitched with threads.
moreHeat and noise insulating material ATM-10
Heat and sound insulating mats ATM-10 is made from basalt staple superthin fiber covered fully with glass or silica fabric and stitched with corresponding threads.
moreArmaGel HT
Flexible aerogel blanket suitable for elevated temperature applications with maximum operating temperatures up to 650 °C (1200 °F).
moreURSA M-25
Soft, lightweight glasswool mats are designed to insulate hot water pipelines and process equipment.
moreURSA M-15
Tthermal and acoustic insulation for pitched roofs, prefabricated timber walls and other applications.
moreThermasheet ECO
Universal sheet insulation without cover and adhesive layer, for heating, water supply, ventilation, cooling and sewerage systems in civil and industrial construction.
moreThermaflex FRZ
Fully recyclable thermal tube insulation product made of direct extruded, closed-cell high quality polyethylene foam.
moreThermasheet ECO SA
Universal sheet insulation based on foamed polyethylene with an adhesive layer covered with an adhesive film. It is applied to ventilating, sanitary and heating systems. Service temperature from -40°С to +95°С.
moreThermasheet FR
Universal sheet isolation of gray color for the new and reconstructed engineering systems on the basis of the made foam polyethylene. It is delivered in the form of big and small rolls. Thermal insulation for sanitary,heating, ventilating and refrigerating systems.
moreThermaflex Ultra M
Is ideal in applications such as pharmaceutical manufacturing, food processing and other industries where hygiene is critical. Its polymer coating protects against mechanical damage. It’s also easy-to-install, due to its unique plastic lock/latch.
moreThermacompact IS (S)
Fully recyclable thermal tube insulation product made of direct extruded, closed-cell high quality polyethylene foam with strong protective polymer coating.
moreThermaSmart Pro
Tube insulation is an advanced insulation material made of high grade thermoplastic foam, ideal for heating, cooling and potable water applications.
moreTank slab GW40
Heat insulating glasswool products rectangular in shape and cross-section. Tank slab GW40 may come with glass-fibre mat coating.
moreHeat-insulating crushed stone from NEOPORM foam glass
Granular bulk material from NEOPORM foam glass does not contain combustible components, asbestos and other carcinogenic fibers, does not emit harmful substances, is resistant to ultraviolet radiation and solvents.
moreShaped products from NEOPORM foam glass
Foam glass (cellular glass) – is a rigid heat insulating material with closed-cell structure produced of foamed glass.
more