extruded polystyrene slab – Northern Renaissance
+7 (812) 777 53 99+7 (812) 928 53 998 (800) 707-53-99 Звонок по России бесплатный

PENOPLEX GEO

Designed for use in industrial and civil construction in loaded structures (eg, foundations, floors, plinths, garden paths, roofs).

more
thumbnail PENOPLEX GEO - manufactured by extrusion from General purpose polystyrene. Designed for use in industrial and civil construction in loaded structures (eg, foundations, floors, plinths, garden paths, roofs). Plates of this type are characterized by high strength and are able to withstand significant loads during the entire service life.

Advantages PENOPLEX:
  • low thermal conductivity;
  • zero water absorption;
  • ecological compatibility;
  • durability;
  • biostability;
  • high compressive and bending strength.

Aapplication:
  • foundations;
  • floors;
  • Stylobates and parking;
  • roof.

Technical parameters

Compressive strength at 10% linear deformation
0,3 MPa
Water absorption in 24 hours, not more than % by volume
0,4
Water absorption in 28 days % by volume
0,5
Fire resistance category
Г4
Calculated coefficient of thermal conductivity under operating conditions” B ”
0,034 W/mK
Coefficient of vapor permeability
0,005 mg/(m. h. Pa)
Density
28-36 kg/m3
Modulus of elasticity
17 MPa
Specific heat
1,45 kJ/(kg*°С)
Tensile strength at static bending
0,4-07 MPa
Operating temperature range
-70...+75 °C
Thickness
30-100 mm
Width
585 mm
Lenght
1185 mm

PENOPLEX ROOF

Designed for use in industrial and civil construction, it is a high-strength material for use in any types roof.

more
thumbnail PENOPLEX ROOF - Designed for use in industrial and civil construction, it is a high-strength material for use in any types roof.

Advantages PENOPLEX:
  • low thermal conductivity;
  • zero water absorption;
  • ecological compatibility;
  • durability;
  • biostability;
  • high compressive and bending strength.

Aapplication:
  • Roofs of any type;
  • Stylobates and parking.

Technical parameters

Compressive strength at 10% linear deformation
0,25 MPa
Water absorption in 24 hours, not more than % by volume
0,4
Water absorption in 28 days % by volume
0,4
Fire resistance category
Г3
Calculated coefficient of thermal conductivity under operating conditions” B ”
0,034 W/mK
Coefficient of vapor permeability
0,005 mg/(m. h. Pa)
Density
26-34 kg/m3
Modulus of elasticity
17 MPa
Specific heat
1,45 kJ/(kg*°С)
Tensile strength at static bending
0,4 MPa
Operating temperature range
-70...+75 °C
Thickness
20-100 mm
Width
585 mm
Lenght
1185 mm

PENOPLEX FASSADE

Heat-insulating boards made of extruded polystyrene foam. Used for insulation of external and internal enclosing structures (insulation of walls, partitions, facade systems).

more
thumbnail PENOPLEX FASSADE manufactured by extrusion from General purpose polystyrene. Used for insulation of external and internal enclosing structures (insulation of walls, partitions, facade systems). The plates have a milled surface, which improves the adhesion of plaster and adhesive compounds to the surface of the material and reduces the time of plastering.

Advantages PENOPLEX:
  • low thermal conductivity;
  • zero water absorption;
  • ecological compatibility;
  • durability;
  • biostability;
  • high compressive and bending strength.

Aapplication:
  • walls;
  • partitions;
  • facade systems.

Technical parameters

Compressive strength at 10% linear deformation
0,2 MPa
Water absorption in 24 hours, not more than % by volume
0,4
Water absorption in 28 days % by volume
0,5
Fire resistance category
Г3
Calculated coefficient of thermal conductivity under operating conditions” B ”
0,034 W/mK
Coefficient of vapor permeability
0,005 mg/(m. h. Pa)
Density
25-33 kg/m3
Modulus of elasticity
15 MPa
Specific heat
1,45 kJ/(kg*°С)
Tensile strength at static bending
0,25 MPa
Operating temperature range
-70...+75 °C
Thickness
20-150 mm
Width
585 mm
Lenght
1185 mm

PENOPLEX 45

Heat-insulating boards made of extruded polystyrene foam. Designed for use in industrial and civil construction, it is a high-strength material for use in any structures where special requirements for loads on the structure.

more
thumbnail PENOPLEX 45 manufactured by extrusion from General purpose polystyrene. Designed for use in industrial and civil construction, it is a high-strength material for use in any structures where special requirements for loads on the structure. Material PENOPLEX 45 is actively used in road construction.

Advantages PENOPLEX:
  • low thermal conductivity;
  • zero water absorption;
  • ecological compatibility;
  • durability;
  • biostability;
  • high compressive and bending strength.

Aapplication:
  • road construction;
  • aerodrome;
  • Loaded structures.

Technical parameters

Compressive strength at 10% linear deformation
0,6 mPa
Water absorption in 24 hours, not more than % by volume
0,2
Water absorption in 28 days % by volume
0,4
Fire resistance category
Г4
Calculated coefficient of thermal conductivity under operating conditions” B ”
0,034 W/mK
Coefficient of vapor permeability
0,005 mg/(m. h. PA)
Density
38-47 kg/m3
Modulus of elasticity
20 mPa
Specific heat
1,45 kJ/(kg*°С)
Tensile strength at static bending
0,35-0,7 MPa
Operating temperature range
-70...+75 °C
Thickness
40-100 mm
Width
600 mm
Lenght
2400 mm




    8 (800) 707-53-99 Звонок по России бесплатный
    firm@sevren.ru