Insulation – Northern Renaissance
+7 (812) 777 53 99+7 (812) 928 53 998 (800) 707-53-99 Звонок по России бесплатный

Ru-Flex ECO PHARM

Technical thermal insulation based on foamed synthetic rubber, intended for surfaces with positive and negative temperatures, is used for objects with increased environmental safety requirements.

more
thumbnail Ru-flex ECO PHARM - technical thermal insulation intended for surfaces with positive and negative temperatures (taking into account the permissible temperature range) is used for objects with high environmental safety requirements.
Due to its composition, the heat-insulating material Ru-flex EKO PHARM is recommended for use in rooms with increased sanitary requirements. It is used to insulate surfaces with a carrier temperature up to +105 ° C.

Application:
  • airport
  • Metro stations
  • Food production
  • Clean rooms
  • bank
  • Kindergartens, schools, hospitals
  • Ship building
  • Offshore platforms
  • Pharmaceutical production
 

Ru-flex ECO PHARM In rolls and tapes has a self-adhesive design Ru-Flex ECO PHARM-SK.

Coating options: PROM POLYMER, PROM FORM, PROM ALU, ALU, PVC

Technical parameters

Self-adhesive execution
Yes
Execution option
Tubes, rolls
Coating options
PROM POLYMER, PROM FORM, PROM ALU, ALU, PVC
Color
green
Application temperature, t ° C
from -200 to +150
Thermal conductivity coefficient at 0 ° С, no more, W / (m × ° С)
0,038
Density, kg / m3
70±20
Water vapor diffusion resistance coefficient, not less
7000
Vapor permeability coefficient, no more, Mg/(m×h×Pa)
0,0063
Water absorption for 24 hours by volume at full immersion, no more,%
0,6
Flammability group
Г1
Acidity index, pH
neutral
Equilibrium sorption moisture, no more, Wc,%
2
Resistance to petroleum products, oils, fats
resistant
Environmental Safety
good
Biological resistance
resistant
Service life, not less
50 years
Thickness, mm
9-32 (tubes), 10-40 (roll)
Internal ø of pipes, mm
10-114
Width in rolls, mm
1000

Ru-Flex CRYO

Technical thermal insulation based on foamed synthetic rubber, intended for pipelines with positive and negative temperatures, except for facilities with increased requirements for the toxicity of combustion products

more
thumbnail Ru-Flex CRYO - Modern thermal insulation material, designed specifically for use in air conditioning and refrigeration systems. Ru-Flex CRYO is produced in the form of tubes that are wound into coils. This design allows you to measure and use the required amount of material with a minimum number of joints. Installation in this case does not create waste, reduces the consumption of glue and tape.

Application:
  • Refrigeration technology
  • Cryogenic systems
  • Air conditioning systems
 

Ru-Flex CRYO manufactured in the form of tubes that are wound into coils.

Technical parameters

Self-adhesive execution
No
Execution options
tubes
Color
black
Application temperature, t ° C
from -200 to +110
Thermal conductivity at 0°С, not more, W/mK
0,032
Density, kg/m3
45±15
Water vapor diffusion resistance coefficient, not less
10000
Vapor permeability coefficient, no more, Mg/(m×h×Pa)
0,0034
Water absorption for 24 hours by volume at full immersion, no more,%
0,6
Flammability group
Г1
Acidity index, pH
neutral
Equilibrium sorption moisture, no more, Wc,%
2
Service life, not less
50 years
Thickness, mm
6, 9, 13
outer diameter, mm
6-28
Packing quantity, m
12-50 (depending on thickness)

Ru-Flex BP

Technical thermal insulation based on foamed synthetic rubber, intended for thermal insulation during ductless laying of pipelines in an underground or overground method.

more
thumbnail Ru-flex BP - advanced thermal insulation material, it is recommended for thermal insulation of pipelines with positive and negative temperatures and shaped products to them, laid underground or aboveground, as well as for thermal insulation of welded joints of pipelines, shut-off and control valves, mud filters, etc.elements of pipelines as a thermal insulation layer in the construction of thermal insulation.

Application:
  • Industrial pipelines
  • Petrochemical facilities
  • Underground pipelines
  • Underground tanks
  • Pipeline fittings
 

Application of Ru-flex BP in underground facilities is possible due to its higher density compared to other thermal insulation materials based on foamed synthetic rubber. For laying in soils with a high moisture content, in swampy areas, it is necessary to use a protective coating (casing), which prevents the constant presence of the material in the water.

Ru-flex BP is available in rolls and sheets. There is no self-adhesive version.

Coating options: RU-FLEX PROM POLYMER

Technical parameters

Self-adhesive execution
No
Execution options
roll
Coating options
RU-FLEX PROM POLYMER
Color
Black
Application temperature, t ° C
from -60 to +105
Thermal conductivity at 0°С, not more, W/mK
0,042
Density, kg/m3
110±40
Water vapor diffusion resistance coefficient, not less
8000
Water absorption for 24 hours by volume at full immersion, no more,%
0,6
Flammability group
Г1
Acidity index, pH
neutral
Compressive strength at 10% linear deformation, not less, kPa
14
Resistance to petroleum products, oils, fats
resistant
Environmental Safety
good
Biological resistance
resistant
Service life, not less
50 years
Thickness, mm
13-50
Width in the form of rolls, mm
1000

Ru-Flex VENT-SK

Thermal insulation material, with a self-adhesive coating applied in the factory, intended for insulation of ventilation and air conditioning systems (taking into account the permissible temperature range)

more
thumbnail Ru-Flex VENT-SK - thermal insulation material, with a self-adhesive coating applied in the factory, intended for insulation of ventilation and air conditioning systems (taking into account the permissible temperature range). It is used at temperatures from -30 to +85 °C. Ru-Flex VENT-SK is non-toxic and is allowed for use in rooms with high sanitary requirements.

Application:
  • Ventilation systems
  • Air conditioning systems
 

Ru-Flex VENT-SK is allowed for use in fire-hazardous areas, as well as in areas with acid, alkali and other toxic compounds. Ruflex VENT-SK is supplied in the form of self-adhesive rolls and in the form of thermal insulation tapes.

Coating options: RU-FLEX METALL

Technical parameters

Self-adhesive execution
Yes
Execution options
roll
Coating options
RU-FLEX METALL
Color
gray
Application temperature, t ° C
from -60 to +85
Thermal conductivity at 0°С, not more, W/mK
0,034
Density, kg/m3
45±15
Water vapor diffusion resistance coefficient, not less
10000
Water absorption for 24 hours by volume at full immersion, no more,%
0,6
Flammability group
Г1
Acidity index, pH
neutral
Resistance to petroleum products, oils, fats
resistant
Environmental Safety
good
Biological resistance
resistant
Service life, not less
50 years
Thickness, mm
6-32
Width in the form of rolls, mm
1000

Ru-Flex VT

Thermal insulation material designed to insulate surfaces with a temperature range from -200 to +150 °C.

more
thumbnail Ru-Flex VT (High temperature) - thermal insulation material designed to insulate surfaces with a temperature range from -200 to +150 °C. Ru-flex VT high-temperature thermal insulation is used to prevent heat loss, protect against condensation and corrosion. Due to the closed cellular structure, it has low thermal conductivity and water absorption – it does not absorb or accumulate moisture. When used in rooms with high humidity and condensation does not require waterproofing due to the low coefficient of vapor permeability.

Application:
  • Low pressure steam pipelines with steam temperatures up to +150 ° С
  • Thermal insulation of boiler equipment and other heating systems; Industrial piping and equipment
  • Thermal insulation of heat exchangers
  • High temperature insulation
  • Solar energy systems
  • Automotive and railway industry
  • Oil and gas, chemical industry
 

Ru-Flex VT supplied in the form of tubes, rolls, plates, tapes, corners, tees, hangers. There is no self-adhesive version.

Coating options: RU-FLEX PROM POLYMER, RU-FLEX PROM FORM, RU-FLEX PROM ALU, RU-FLEX ALU, RU-FLEX PVC

Technical parameters

Self-adhesive execution
No
Execution options
Tubes, rolls
Coating options
RU-FLEX PROM POLYMER, RU-FLEX PROM FORM, RU-FLEX PROM ALU, RU-FLEX ALU, RU-FLEX PVC
Color
Black
Application temperature, t ° C
from -200 to +150
Thermal conductivity at 0°С, not more, W/mK
0,038
Density, kg/m3
70±15
Water vapor diffusion resistance coefficient, not less
7000
Vapor permeability coefficient, no more, Mg/(m×h×Pa)
0,0063
Water absorption for 24 hours by volume at full immersion, no more,%
0,6
Flammability group
Г1
Acidity index, pH
neutral
Equilibrium sorption moisture, no more, Wc,%
2
Resistance to petroleum products, oils, fats
resistant
Environmental Safety
good
Biological resistance
resistant
Service life, not less
50 years
Thickness, mm
9-50
Lenght, m
2
Width in the form of rolls, mm
1000
Internal ø of pipes, mm
10-133

Ru-flex ST

Technical heat-insulating material intended for the insulation of surfaces with a temperature range from -200 to +110 ° C, with the exception of objects with increased requirements for the toxicity of combustion products

more
thumbnail Ru-flex ST (standard) - technical heat-insulating material intended for the insulation of surfaces with a temperature range from -200 to +110 ° C, with the exception of objects with increased requirements for the toxicity of combustion products. Due to the closed cellular structure, it has low thermal conductivity and water absorption - it does not absorb or accumulate moisture. When used in rooms with high humidity and condensation, it does not require waterproofing due to its low vapor permeability coefficient.

Application:
  • Industrial pipelines
  • Heating and water supply
  • Petrochemical facilities
  • Cryogenic technique
  • Shipbuilding
  • Medical industry
  • Food industry
  • HVAC
 

Ru-flex ST supplied as tubes, rolls, plates, corners, tees, tapes, hangers.

Thermal insulation material Ru-Flex ST in the form of rolls, plates, tapes can be self-adhesive execution - Ru-Flex ST-SK and used in this form to insulate surfaces with temperatures from -40 ° C to 85 ° C.

Coating options: RU-FLEX PROM POLYMER, RU-FLEX PROM FORM, RU-FLEX PROM ALU, RU-FLEX ALU, RU-FLEX PVC

Technical parameters

Self-adhesive execution
Yes
Execution option
Tubes, rolls
Coating options
RU-FLEX PROM POLYMER, RU-FLEX PROM FORM, RU-FLEX PROM ALU, RU-FLEX ALU, RU-FLEX PVC
Color
Black
Application temperature, t ° C
from -200°C to +110°C
Thermal conductivity at 0°С, not more, W/mK
0,032
Density, kg/m3
45±15
Water vapor diffusion resistance coefficient, not less
10000
Vapor permeability coefficient, no more, Mg/(m×h×Pa)
0,0034
Water absorption for 24 hours by volume at full immersion, no more,%
0,6
Flammability group
Г1
Acidity index, pH
neutral
Equilibrium sorption moisture, no more, Wc,%
2
Resistance to petroleum products, oils, fats
neutral
Environmental Safety
well
Biological resistance
well
Service life, not less
50 years
Thickness, mm
6-50
Lenght, m
2
Width in the form of rolls, mm
1000
Internal ø of pipes, mm
6-160



8 (800) 707-53-99 Звонок по России бесплатный
firm@sevren.ru