PAROC Pro Wired Mat 80 is a non-combustible stone wool mat. It is very commonly used for thermal insulation of cylindrical, conic and level surfaces in different industrial applications.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

PAROC Pro Wired Mat 80 AL1 is a non-combustible stone wool mat with aluminium foil facing. It is very commonly used for thermal insulation of cylindrical, conic and level surfaces in different industrial applications. At high temperatures the aluminium foil facing is of significance for insulating the radiation heat.

PAROC Pro Wired Mat 80 AL1 is a non-combustible stone wool mat with aluminium foil facing. It is very commonly used for thermal insulation of cylindrical, conic and level surfaces in different industrial applications. At high temperatures the aluminium foil facing is of significance for insulating the radiation heat.

PAROC Pro Wired Mat 100 AL1 is a non-combustible stone wool mat with aluminium foil facing. It is very commonly used for thermal insulation of cylindrical, conic and level surfaces in different industrial applications. At high temperatures the aluminium foil facing is of significance for insulating the radiation heat.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

PAROC Pro Wired Mat 100 is a non-combustible stone wool mat. It is commonly used for thermal insulation of cylindrical, conic and level surfaces in different industrial applications.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

PAROC Pro Bend 100 is a ready cut part for small pipe elbows made of non-combustible stone wool pipe section. Factory produced bends are a very good and fast insulation solution for pipe elbows.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

PAROC Hvac Bend AluCoat T is a non-combustible stone wool pipe section bend for thermal and condensation insulation of pipework in buildings and ships. It has a reinforced aluminium foil facing and tape in the longitudinal seam which prevents condensation. Factory produced bends are a very good and fast insulation solution for pipe elbows.

Surface temperature of the facing must not exceed +80°C (temperature restriction determined in accordance with heat resistance of adhesive).

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

PAROC Hvac Mat AluCoat is a non-combustible stone wool mat. It is used for thermal and condensation insulation of circular and rectangular ventilation ducts. It has a reinforced aluminium facing.

The surface temperature of the facing must not exceed +80°C (temperature restriction determined in accordance with the heat resistance of adhesive).

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

PAROC Hvac Lamella Mat AluCoat is a non-combustible stone wool for thermal and condensation insulation of ventilation ducts and equipment. It has a reinforced aluminium foil facing.

For Marine applications also available with facing G4 (white glass fibre facing with aluminium below).

Surface temperature of the facing must not exceed 80°C (temperature restriction determined in accordance with heat resistance adhesive).

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

PAROC Pro Lamella Mat AluCoat is a non-combustible stone wool insulation for thermal and condensation insulation of ventilation ducts and equipment. It has a reinforced aluminium foil facing.

Surface temperature of the facing must not exceed 80°C (temperature restriction determined in accordance with heat resistance adhesive).

Surface temperature of the facing must not exceed 80°C (temperature restriction determined in accordance with heat resistance adhesive).

PAROC Pro Section 100 is a non-combustible stone wool pipe section for industrial pipe lines. PAROC pipe sections possess excellent compression strength and easily carry the weight of metal claddings. Hence, they eliminate the energy loss and thermal bridges caused by added cladding support structures and minimize the risk of damages from mechanical impacts.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

PAROC Hvac Section AluCoat T is a non-combustible stone wool pipe section for thermal and condensation insulation of pipework and air ducts in buildings and ships. It has a reinforced aluminium foil facing and tape in the longitudinal seam which prevents condensation and gives a quick installation.

Surface temperature of the facing must not exceed +80°C (temperature restriction determined in accordance with heat resistance of adhesive).

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

PAROC Pro Lock 100 is a non-combustible stone wool pipe section for industrial pipe lines. PAROC Pro Lock is a unique solution, providing the benefits of a two layer insulation with a single layer installation. PAROC Pro Lock has a Z-lock connection in all circumferential and longitudinal joints.

The Z-lock is reducing thermal losses caused by thermal expansion.

PAROC pipe sections possess excellent compression strength and easily carries the weight of metal claddings. Hence eliminates the energy loss and thermal bridges caused by added cladding support structures and minimizes the risk of damages from mechanical impacts.

Depth of the z-joint is 50 mm.

PAROC Pro Section 140 is a non-combustible stone wool pipe section for industrial pipe lines. PAROC pipe sections possess excellent compression strength and easily carry the weight of metal claddings. Hence, they eliminate the energy loss and thermal bridges caused by added cladding support structures and minimize the risk of damages from mechanical impacts.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

PAROC Pro Slab 40 is a non-combustible stone wool insulation for process tank walls and other large cylindrical or flat surfaces. Tank wall slab with density of 40 kg/m3 is an ideal product for tanks with low temperature.

PAROC Pro Slab 40 is a non-combustible stone wool insulation for process tank walls and other large cylindrical or flat surfaces. Tank wall slab with density of 40 kg/m3 is an ideal product for tanks with low temperature.

PAROC Pro Slab 60 is a non-combustible stone wool insulation for process tank walls and other flat surfaces. Tank wall slab with density of 60 kg/m3 is an ideal product for tanks with low or medium temperature.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200 °C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000 °C.

PAROC Pro Slab 80 is a non-combustible stone wool slab for thermal insulation of flat surfaces in industrial equipment and vessels.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200 °C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000 °C.

PAROC Pro Slab 100 is a non-combustible stone wool slab for thermal insulation of flat surfaces in industrial equipment and vessels.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

PAROC Pro Roof Slab 20 kPa is a non-combustible stone wool slab for industrial tank roofs. It is strong enough to withstand normal walking load during installation and maintenance.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.