PAROC Pro Bend 100 is a ready cut part for small pipe elbows made of non-combustible stone wool pipe section. Factory produced bends are a very good and fast insulation solution for pipe elbows.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

PAROC Hvac Bend AluCoat T is a non-combustible stone wool pipe section bend for thermal and condensation insulation of pipework in buildings and ships. It has a reinforced aluminium foil facing and tape in the longitudinal seam which prevents condensation. Factory produced bends are a very good and fast insulation solution for pipe elbows.

Surface temperature of the facing must not exceed +80°C (temperature restriction determined in accordance with heat resistance of adhesive).

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

PAROC Pro Section 100 is a non-combustible stone wool pipe section for industrial pipe lines. PAROC pipe sections possess excellent compression strength and easily carry the weight of metal claddings. Hence, they eliminate the energy loss and thermal bridges caused by added cladding support structures and minimize the risk of damages from mechanical impacts.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

PAROC Hvac Section AluCoat T is a non-combustible stone wool pipe section for thermal and condensation insulation of pipework and air ducts in buildings and ships. It has a reinforced aluminium foil facing and tape in the longitudinal seam which prevents condensation and gives a quick installation.

Surface temperature of the facing must not exceed +80°C (temperature restriction determined in accordance with heat resistance of adhesive).

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

PAROC Pro Lock 100 is a non-combustible stone wool pipe section for industrial pipe lines. PAROC Pro Lock is a unique solution, providing the benefits of a two layer insulation with a single layer installation. PAROC Pro Lock has a Z-lock connection in all circumferential and longitudinal joints.

The Z-lock is reducing thermal losses caused by thermal expansion.

PAROC pipe sections possess excellent compression strength and easily carries the weight of metal claddings. Hence eliminates the energy loss and thermal bridges caused by added cladding support structures and minimizes the risk of damages from mechanical impacts.

Depth of the z-joint is 50 mm.

PAROC Pro Section 140 is a non-combustible stone wool pipe section for industrial pipe lines. PAROC pipe sections possess excellent compression strength and easily carry the weight of metal claddings. Hence, they eliminate the energy loss and thermal bridges caused by added cladding support structures and minimize the risk of damages from mechanical impacts.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.