Mineral wool mats – Northern Renaissance
+7 (812) 777 53 99+7 (812) 928 53 998 (800) 707-53-99 Звонок по России бесплатный

Isotec Wired Mat 80

Flexible heat insulating products with the mantle made of a mesh mechanically joined with heat insulating material.

more
thumbnail Isotec Wired Mat 80 - Flexible heat insulating products with the mantle made of a mesh mechanically joined with heat insulating material. May come with coating made of aluminium armoured foil the aluminium thickness of up to 20 μm (ISOTEC Wired mat80-AL and ISOTEC Wired mat100-AL) and coated with aluminium foil thick from 20 to 40 μm without armouring (ISOTEC Wired mat80-AL2).

Application: Heat insulation and fire protection of flat, cylindrical, conical and other convoluted surfaces of process and power equipment, pipelines, air ducts, gas ducts, smoke exhaust systems and other objects.

Fire-resistance rating of steel air ducts with coating made of wired mats ISOTEC Wired Mat 80:

Coating thickness, mm Fire-resistance rating, El
30 60
40 90
50 120
60 150
70 180
80 240

Technical parameters

Density, kg/m3
80
Maximum service temperature
660
Thermal Conductivity in 10 °C, λ10
0,034
Thermal Conductivity in 25 °C, λ25
0,035
Thermal Conductivity in 50 °C, λ50
0,038
Thermal Conductivity in 100 °C, λ100
0,044
Thermal Conductivity in 125 °C, λ125
0,047
Thermal Conductivity in 150 °C, λ150
0,053
Thermal Conductivity in 200 °C, λ200
0,064
Thermal Conductivity in 250 °C, λ250
0,075
Thermal Conductivity in 300 °C, λ300
0,085
Fire hazard class
НГ (КМ0)
Width, mm
1000
Lenght, mm
2000 - 5000
Thickness, mm
30-120

Isotec Wired Mat 100

Flexible heat insulating products with the mantle made of a mesh mechanically joined with heat insulating material.

more
thumbnail Isotec Wired Mat 100 - Flexible heat insulating products with the mantle made of a mesh mechanically joined with heat insulating material. May come with coating made of aluminium armoured foil the aluminium thickness of up to 20 μm (ISOTEC Wired mat80-AL and ISOTEC Wired mat100-AL) and coated with aluminium foil thick from 20 to 40 μm without armouring (ISOTEC Wired mat80-AL2).

Application: Heat insulation and fire protection of flat, cylindrical, conical and other convoluted surfaces of process and power equipment, pipelines, air ducts, gas ducts, smoke exhaust systems and other objects.

Fire-resistance rating of steel air ducts with coating made of wired mats ISOTEC Wired Mat 100:

Coating thickness, mm Fire-resistance rating, El
30 90
40 120
50 150
60 180
70 240

Technical parameters

Density, kg/m3
100
Maximum service temperature
680
Thermal Conductivity in 10 °C, λ10
0,034
Thermal Conductivity in 25 °C, λ25
0,036
Thermal Conductivity in 50 °C, λ50
0,039
Thermal Conductivity in 100 °C, λ100
0,044
Thermal Conductivity in 125 °C, λ125
0,046
Thermal Conductivity in 150 °C, λ150
0,051
Thermal Conductivity in 200 °C, λ200
0,060
Thermal Conductivity in 250 °C, λ250
0,070
Thermal Conductivity in 300 °C, λ300
0,078
Fire hazard class
НГ (КМ0)
Width, mm
1000
Lenght, mm
2000 - 5000
Thickness, mm
30-120

Paroc Pro Wired Mat 80

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

more
thumbnail PAROC Pro Wired Mat 80 is a non-combustible stone wool mat. It is very commonly used for thermal insulation of cylindrical, conic and level surfaces in different industrial applications.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Technical parameters

Nominal Density
80 kg/m³
Width
600/1200 mm
Length
depending on thickness
Thickness
30-120 mm
Reaction to Fire, Euroclass
A1
Maximum Service Temperature
640°C
Thermal Conductivity in 10 °C, λ10
0,033 W/mK

PAROC Pro Wired Mat 80 AL1

PAROC Pro Wired Mat 80 AL1 is a non-combustible stone wool mat with aluminium foil facing. It is very commonly used for thermal insulation of cylindrical, conic and level surfaces in different industrial applications.

more
thumbnail PAROC Pro Wired Mat 80 AL1 is a non-combustible stone wool mat with aluminium foil facing. It is very commonly used for thermal insulation of cylindrical, conic and level surfaces in different industrial applications. At high temperatures the aluminium foil facing is of significance for insulating the radiation heat.

PAROC Pro Wired Mat 80 AL1 is a non-combustible stone wool mat with aluminium foil facing. It is very commonly used for thermal insulation of cylindrical, conic and level surfaces in different industrial applications. At high temperatures the aluminium foil facing is of significance for insulating the radiation heat.

Technical parameters

Nominal Density
80 kg/m³
Width
1200 mm
Length
depending on thickness
Thickness
30-120 mm
Reaction to Fire, Euroclass
A1
Thermal Conductivity in 10 °C, λ10
0,033 W/mK

PAROC Pro Wired Mat 100 AL1

PAROC Pro Wired Mat 100 AL1 is a non-combustible stone wool mat with aluminium foil facing. It is very commonly used for thermal insulation of cylindrical, conic and level surfaces in different industrial applications.

more
thumbnail PAROC Pro Wired Mat 100 AL1 is a non-combustible stone wool mat with aluminium foil facing. It is very commonly used for thermal insulation of cylindrical, conic and level surfaces in different industrial applications. At high temperatures the aluminium foil facing is of significance for insulating the radiation heat.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Technical parameters

Nominal Density
100 kg/m³
Width
1200 mm
Length
depending on thickness
Thickness
30-120 mm
Reaction to Fire, Euroclass
A1
Thermal Conductivity in 10 °C, λ10
0,034 W/mK

Paroc Pro Wired Mat 100

PAROC Pro Wired Mat 100 is a non-combustible stone wool mat. It is commonly used for thermal insulation of cylindrical, conic and level surfaces in different industrial applications.

more
thumbnail PAROC Pro Wired Mat 100 is a non-combustible stone wool mat. It is commonly used for thermal insulation of cylindrical, conic and level surfaces in different industrial applications.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Technical parameters

Nominal Density
100 kg/m³
Width
600/1200 mm
Length
depending on thickness
Thickness
30-120 mm
Reaction to Fire, Euroclass
A1
Maximum Service Temperature
660°C
Thermal Conductivity in 10 °C, λ10
0,034 W/mK

PAROC Hvac Mat AluCoat

Non-combustible stone wool mat. It is used for thermal and condensation insulation of circular and rectangular ventilation ducts. It has a reinforced aluminium facing.

more
thumbnail PAROC Hvac Mat AluCoat is a non-combustible stone wool mat. It is used for thermal and condensation insulation of circular and rectangular ventilation ducts. It has a reinforced aluminium facing.

The surface temperature of the facing must not exceed +80°C (temperature restriction determined in accordance with the heat resistance of adhesive).

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Technical parameters

Nominal Density
35 kg/m³
Width
1000 mm
Length
depending on thickness
Thickness
30-120 mm
Reaction to Fire, Euroclass
A1
Thermal Conductivity in 0 °C, λ0
0,034 W/mK
Thermal Conductivity in 10 °C, λ10
0,036 W/mK
Thermal Conductivity in 25 °C, λ25
0,037 W/mK
Thermal Conductivity in 50 °C, λ50
0,046 W/mK
Thermal Conductivity in 100 °C, λ100
0,060 W/mK
hermal Conductivity in 150 °C, λ150
0,075 W/mK
Thermal Conductivity in 200 °C, λ200
0,093 W/mK
Thermal Conductivity in 250 °C, λ250
0,115 W/mK
Water Absorption, Short Term WS, Wp
≤ 1 kg/m²
Water Vapour Diffusion Resistance
MV2

PAROC Hvac Lamella Mat AluCoat

Non-combustible stone wool for thermal and condensation insulation of ventilation ducts and equipment. It has a reinforced aluminium foil facing.

more
thumbnail PAROC Hvac Lamella Mat AluCoat is a non-combustible stone wool for thermal and condensation insulation of ventilation ducts and equipment. It has a reinforced aluminium foil facing.

For Marine applications also available with facing G4 (white glass fibre facing with aluminium below).

Surface temperature of the facing must not exceed 80°C (temperature restriction determined in accordance with heat resistance adhesive).

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Technical parameters

Nominal Density
35 kg/m3
Width
1000 mm
Length
depending on thickness
Thickness
20-100 mm
Maximum Service Temperature
250 °C
Reaction to Fire, Euroclass
A1
Fire Classification (IMO)
Non-combustible
Surface Flammability (IMO)
Low flame-spread characteristics
Thermal Conductivity in 10 °C, λ10
0,038 W/mK
Thermal Conductivity in 25 °C, λ25
0,041 W/mK
Thermal Conductivity in 50 °C, λ50
0,047 W/mK
Thermal Conductivity in 100 °C, λ100
0,059 W/mK
Thermal Conductivity in 150 °C, λ150
0,074 W/mK
Thermal Conductivity in 200 °C, λ200
0,091 W/mK
Thermal Conductivity in 250 °C, λ250
0,110 W/mK
Water Absorption, Short Term WS, Wp
≤ 1 kg/m²
Water Vapour Diffusion Resistance
MV2

PAROC Pro Lamella Mat AluCoat

PAROC Pro Lamella Mat AluCoat is a non-combustible stone wool insulation for thermal and condensation insulation of ventilation ducts and equipment. It has a reinforced aluminium foil facing.

more
thumbnail PAROC Pro Lamella Mat AluCoat is a non-combustible stone wool insulation for thermal and condensation insulation of ventilation ducts and equipment. It has a reinforced aluminium foil facing.

Surface temperature of the facing must not exceed 80°C (temperature restriction determined in accordance with heat resistance adhesive).

Surface temperature of the facing must not exceed 80°C (temperature restriction determined in accordance with heat resistance adhesive).

Technical parameters

Nominal Density
50 kg/m³
Width
1000 mm
Length
depending on thickness
Thickness
20-100 mm
Maximum Service Temperature
500 °C
Reaction to Fire, Euroclass
A1
Fire Classification (IMO)
Non-Combustible
Surface Flammability (IMO)
Low flame-spread characteristics
Thermal Conductivity in 10 °C, λ10
0,039 W/mK
Thermal Conductivity in 25 °C, λ25
0,042 W/mK
Thermal Conductivity in 50 °C, λ50
0.045 W/mK
Thermal Conductivity in 100 °C, λ100
0.055 W/mK
Thermal Conductivity in 125 °C, λ125
0,062 W/mK
Thermal Conductivity in 200 °C, λ200
0.081 W/mK
Thermal Conductivity in 300 °C, λ300
0.120 W/mK
Water Absorption, Short Term WS, Wp
≤ 1 kg/m²
Water Vapour Diffusion Resistance
MV2



8 (800) 707-53-99 Звонок по России бесплатный
firm@sevren.ru