Ru-flex ST (standard) - technical heat-insulating material intended for the insulation of surfaces with a temperature range from -200 to +110 ° C, with the exception of objects with increased requirements for the toxicity of combustion products. Due to the closed cellular structure, it has low thermal conductivity and water absorption - it does not absorb or accumulate moisture. When used in rooms with high humidity and condensation, it does not require waterproofing due to its low vapor permeability coefficient.

Application: Industrial pipelines Heating and water supply Petrochemical facilities Cryogenic technique Shipbuilding Medical industry Food industry HVAC

 

Ru-flex ST supplied as tubes, rolls, plates, corners, tees, tapes, hangers.

Thermal insulation material Ru-Flex ST in the form of rolls, plates, tapes can be self-adhesive execution - Ru-Flex ST-SK and used in this form to insulate surfaces with temperatures from -40 ° C to 85 ° C.

Coating options: RU-FLEX PROM POLYMER, RU-FLEX PROM FORM, RU-FLEX PROM ALU, RU-FLEX ALU, RU-FLEX PVC

PAROC Pro Section 100 is a non-combustible stone wool pipe section for industrial pipe lines. PAROC pipe sections possess excellent compression strength and easily carry the weight of metal claddings. Hence, they eliminate the energy loss and thermal bridges caused by added cladding support structures and minimize the risk of damages from mechanical impacts.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

PAROC Hvac Section AluCoat T is a non-combustible stone wool pipe section for thermal and condensation insulation of pipework and air ducts in buildings and ships. It has a reinforced aluminium foil facing and tape in the longitudinal seam which prevents condensation and gives a quick installation.

Surface temperature of the facing must not exceed +80°C (temperature restriction determined in accordance with heat resistance of adhesive).

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

PAROC Pro Section 140 is a non-combustible stone wool pipe section for industrial pipe lines. PAROC pipe sections possess excellent compression strength and easily carry the weight of metal claddings. Hence, they eliminate the energy loss and thermal bridges caused by added cladding support structures and minimize the risk of damages from mechanical impacts.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

PAROC Marine Wired Mat 80 is a non-combustible stone wool wired mat for fire protection on ships. It is used in A30 and A15 constructions for Steel Decks and A15 constructions for Steel Bulkheads.

Application: Decks and bulkheads in steel and aluminium constructions. Circular ducts. Wall cassettes. Air-conditioning devices and ducts. Products with facing above suspended ceilings and in maintenance facilities. Exhaust gas dampers. Large pipe elbows Penetrations of air ducts.

Facings: ALUCOAT - reinforced aluminium foil facing, 62-80 g/m2; G1 - white glass fibre facing, ~ 210 g/m2; G2 - black glass fibre facing, ~ 200 g/m2; G4 - white glass fibre facing with aluminium below, ~ 250 g/m2; G7 - white glass fibre clothing with aluminium facing on top, ~ 250 g/m2.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

PAROC Marine Wired Mat 100 is a non-combustible stone wool wired mat for fire protection on ships. It is commonly used in A-class constructions for Steel and Aluminium Decks and Bulkheads..

Application: Decks and bulkheads in steel and aluminium constructions. Circular ducts. Wall cassettes. Air-conditioning devices and ducts. Products with facing above suspended ceilings and in maintenance facilities. Exhaust gas dampers. Large pipe elbows Penetrations of air ducts.

Facings: ALUCOAT - reinforced aluminium foil facing, 62-80 g/m2; G1 - white glass fibre facing, ~ 210 g/m2; G2 - black glass fibre facing, ~ 200 g/m2; G4 - white glass fibre facing with aluminium below, ~ 250 g/m2; G7 - white glass fibre clothing with aluminium facing on top, ~ 250 g/m2.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

PAROC Marine Mat 30 is a non-combustible stone wool nat for thermal insulation on ships.

Application: Thermal and condensation insulation of ducts and devices. Machinery and devices.

Facings: ALUCOAT - reinforced aluminium foil facing, 62-80 g/m2; G4 - white glass fibre facing with aluminium below, ~ 250 g/m2; G7 - white glass fibre clothing with aluminium facing on top, ~ 250 g/m2.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

PAROC Marine Mat 35 AluCoat is a non-combustible stone wool mat for thermal insulation on ships.

Application: Thermal and condensation insulation of ducts and devices. Machinery and devices.

Facings: ALUCOAT - reinforced aluminium foil facing, 62-80 g/m2;

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

PAROC Marine Slab 40 is a non-combustible stone wool slab for thermal insulation on ships.

Application: Various applications. Devices and tanks with flat surfaces. Sound insulation above suspended ceilings. With aluminium foil as condensation insulation and in applications where thick insulation is required. Products with facing in facilities where they remain visible. Machinery and devices.

Facings: ALUCOAT - reinforced aluminium foil facing, 62-80 g/m2;

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

PAROC Marine Slab 40 is a non-combustible stone wool slab for thermal insulation on ships.

Application: Various applications. Devices and tanks with flat surfaces. Sound insulation above suspended ceilings. With aluminium foil as condensation insulation and in applications where thick insulation is required. Products with facing in facilities where they remain visible. Machinery and devices.

Facings: ALUCOAT - reinforced aluminium foil facing, 62-80 g/m2; G1 - white glass fibre facing, ~ 210 g/m2; G2 - black glass fibre facing, ~ 200 g/m2; G3 - white glass fibre facing, ~ 430 g/m2 G4 - white glass fibre facing with aluminium below, ~ 250 g/m2; G7 - white glass fibre clothing with aluminium facing on top, ~ 250 g/m2. N1 - grey non-woven tissue, ~ 50 g/m2. N3 - black non-woven tissue, ~ 60 g/m2. N5 - grey non-woven tissue, ~ 60 г/м2. LF1 - lacquered aluminium laminate with glass fibre reinforcement, ~ 97 г/м2.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

PAROC Marine Slab 60 is a non-combustible stone wool slab for thermal insulation on ships.

Application: Decks and bulkheads in steel and aluminium constructions. Fire doors. Wall cassettes. Air-conditioning devices and ducts. Products with facing especially for car decks, engine rooms and air-conditioning machine rooms.

Facings: ALUCOAT - reinforced aluminium foil facing, 62-80 g/m2; G1 - white glass fibre facing, ~ 210 g/m2; G2 - black glass fibre facing, ~ 200 g/m2; G3 - white glass fibre facing, ~ 430 g/m2 G4 - white glass fibre facing with aluminium below, ~ 250 g/m2; G7 - white glass fibre clothing with aluminium facing on top, ~ 250 g/m2. N1 - grey non-woven tissue, ~ 50 g/m2. N3 - black non-woven tissue, ~ 60 g/m2. N5 - grey non-woven tissue, ~ 60 г/м2. LF1 - lacquered aluminium laminate with glass fibre reinforcement, ~ 97 г/м2.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

PAROC Marine Slab 80 is a non-combustible stone wool slab for fire and thermal insulation on ships.

Application: Decks and bulkheads in steel and aluminium constructions. Fire doors. Wall cassettes. Air-conditioning devices and ducts. Products with facing especially for car decks, engine rooms and air-conditioning machine rooms.

Facings: ALUCOAT - reinforced aluminium foil facing, 62-80 g/m2; G1 - white glass fibre facing, ~ 210 g/m2; G2 - black glass fibre facing, ~ 200 g/m2; G3 - white glass fibre facing, ~ 430 g/m2 G4 - white glass fibre facing with aluminium below, ~ 250 g/m2; G7 - white glass fibre clothing with aluminium facing on top, ~ 250 g/m2. N1 - grey non-woven tissue, ~ 50 g/m2. N3 - black non-woven tissue, ~ 60 g/m2. N5 - grey non-woven tissue, ~ 60 г/м2. LF1 - lacquered aluminium laminate with glass fibre reinforcement, ~ 97 г/м2.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

PAROC Marine Fire Slab 80 is a non-combustible stone wool slab for fire protection and thermal insulation on ships.

Application: Decks and bulkheads in steel and aluminium constructions. Fire doors. Wall cassettes. Air-conditioning devices and ducts. Products with facing especially for car decks, engine rooms and air-conditioning machine rooms.

Facings: ALUCOAT - reinforced aluminium foil facing, 62-80 g/m2; G1 - white glass fibre facing, ~ 210 g/m2; G2 - black glass fibre facing, ~ 200 g/m2; G3 - white glass fibre facing, ~ 430 g/m2 G4 - white glass fibre facing with aluminium below, ~ 250 g/m2; G7 - white glass fibre clothing with aluminium facing on top, ~ 250 g/m2. N1 - grey non-woven tissue, ~ 50 g/m2. N3 - black non-woven tissue, ~ 60 g/m2. N5 - grey non-woven tissue, ~ 60 г/м2. LF1 - lacquered aluminium laminate with glass fibre reinforcement, ~ 97 г/м2.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

PAROC Marine Fire Slab 100 is a non-combustible stone wool slab for fire protection on ships. It is commonly used in A-and H-class constructions for Steel and Aluminium Decks and Bulkheads.

Application: Decks and bulkheads in steel and aluminium constructions. Fire doors. Wall cassettes. Air-conditioning devices and ducts. Products with facing especially for car decks, engine rooms and air-conditioning machine rooms.

Facings: ALUCOAT - reinforced aluminium foil facing, 62-80 g/m2; G1 - white glass fibre facing, ~ 210 g/m2; G2 - black glass fibre facing, ~ 200 g/m2; G3 - white glass fibre facing, ~ 430 g/m2 G4 - white glass fibre facing with aluminium below, ~ 250 g/m2; G7 - white glass fibre clothing with aluminium facing on top, ~ 250 g/m2. N1 - grey non-woven tissue, ~ 50 g/m2. N3 - black non-woven tissue, ~ 60 g/m2. N5 - grey non-woven tissue, ~ 60 г/м2. LF1 - lacquered aluminium laminate with glass fibre reinforcement, ~ 97 г/м2.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

PAROC Marine Slab 130 is a non-combustible stone wool slab for fire and thermal insulation on ships.

Application: Wall panels and cassettes. Suspended ceiling panels. Floating floors. Fire doors.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

PAROC Marine Floor Slab 140 is a non-combustible stone wool slab used for fire protection on ships in A60 Floating floor constructions.

Application: Wall panels and cassettes. Suspended ceiling panels. Floating floors. Fire doors.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

PAROC Marine Fire Slab 150 - is a non-combustible stone wool slab for fire and thermal insulation on ships.

Application: Wall panels and cassettes. Suspended ceiling panels. Floating floors. Fire doors.

Facings: ALUCOAT - reinforced aluminium foil facing, 62-80 g/m2; G1 - white glass fibre facing, ~ 210 g/m2; G2 - black glass fibre facing, ~ 200 g/m2; G3 - white glass fibre facing, ~ 430 g/m2 G4 - white glass fibre facing with aluminium below, ~ 250 g/m2; G7 - white glass fibre clothing with aluminium facing on top, ~ 250 g/m2. N1 - grey non-woven tissue, ~ 50 g/m2. N3 - black non-woven tissue, ~ 60 g/m2. N5 - grey non-woven tissue, ~ 60 г/м2. LF1 - lacquered aluminium laminate with glass fibre reinforcement, ~ 97 г/м2.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

PAROC Marine Slab 160 is a non-combustible stone wool slab for fire and thermal insulation on ships.

Application: Wall panels and cassettes. Suspended ceiling panels. Floating floors. Fire doors.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

PAROC Marine Slab 180 - is a non-combustible stone wool slab for fire and thermal insulation on ships.

Application: Wall panels and cassettes. Suspended ceiling panels. Floating floors. Fire doors.

Facings: N1 - grey non-woven tissue classified as a non-combustible surface material, ~ 50 г/м2. N3 - black non-woven tissue classified as surface material with low flame-spread characteristics, ~ 60 г/м2. N5 - grey non-woven tissue classified as surface material with low flame-spread characteristics, ~ 60 г/м2.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

PAROC Marine Slab 220 - is a non-combustible stone wool slab for fire and thermal insulation on ships.

Application: Ship cabin constructions and cassettes. Sound reduction panels. Draught barriers. Doors, wall and ceiling panels.

Facings: N1 - grey non-woven tissue classified as a non-combustible surface material, ~ 50 г/м2. N3 - black non-woven tissue classified as surface material with low flame-spread characteristics, ~ 60 г/м2. N5 - grey non-woven tissue classified as surface material with low flame-spread characteristics, ~ 60 г/м2.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

PAROC Marine Slab 250 - is a non-combustible stone wool slab for fire and thermal insulation on ships.

Application: Ship cabin constructions and cassettes. Sound reduction panels. Draught barriers. Doors, wall and ceiling panels.

Facings: N1 - grey non-woven tissue classified as a non-combustible surface material, ~ 50 г/м2. N3 - black non-woven tissue classified as surface material with low flame-spread characteristics, ~ 60 г/м2. N5 - grey non-woven tissue classified as surface material with low flame-spread characteristics, ~ 60 г/м2.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.